Use and Care Manual

6
4 Technical data
Rated voltage
21.6 V
Weight
6.0 lb
(2.7 kg)
Speed 1st gear
0 rpm … 310 rpm
2nd gear
0 rpm … 530 rpm
3rd gear
0 rpm … 1,210 rpm
4th gear
0 rpm … 2,100 rpm
Torque range (15 settings)
1 ftlb
f
… 9 ftlb
f
(2 Nm … 12 Nm)
Ø drill bit (softwood)
1/16 in … 1 7/8 in
Ø drill bit (hardwood)
1/16 in … 25/32 in
Ø drill bit (metal)
1/16 in … 1/2 in
5 Operation
5.1 Inserting the battery 2
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and that the switch safety lock
is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop out and fall, thereby
presenting a hazard to other persons.
▶ Push the battery into the tool from the rear until it is heard to engage with a click.
5.2 Removing the battery 3
▶ Remove the battery.
5.3 Fitting the belt hook (optional) 4
WARNING
Risk of injury. A falling power tool may present a risk of injury to yourself and others.
▶ Check that the belt hook is fitted securely before beginning work.
Note
The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can
be fitted to allow attachment on the left or right side of the body.
▶ Fit the belt hook.
Printed: 06.11.2015 | Doc-Nr: PUB / 5255075 / 000 / 00