Operating Instruction SR 6-A22 (01)

*2186515*
2186515 English 15
9.1 The reciprocating saw is not in working order
Trouble or fault Possible cause Action to be taken
Power tool does not
start.
The battery is not cor-
rectly inserted.
▶ Push the battery in
until it engages with a
click.
The battery is empty. ▶ Charge the battery.
The transport lock is
engaged.
▶ Disengage the trans-
port lock.
The saw blade can-
not be removed from
the chuck.
The locking lever was
not pushed as far as it
will go.
▶ Push the locking lever
as far as it will go and
remove the saw blade.
Chuck clogged by
residues from sawing
operations.
▶ Remove the residues
from sawing opera-
tions and regularly
clean the chuck from
the outside. Care
of the power tool.
→ page 13
9.2 The reciprocating saw is in working order
Trouble or fault Possible cause Action to be taken
The tool does not
achieve full power.
The control switch is not
fully pressed.
▶ Press the control
switch fully.
The battery is
discharged.
▶ Change the battery
and charge the empty
battery.
The saw blade can-
not be removed from
the chuck.
The locking lever was
not pushed as far as it
will go.
▶ Push the locking lever
as far as it will go and
remove the saw blade.
10 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
Battery disposal
Improper disposal of batteries can result in health hazards from leaking
gases or fluids.
▶ DO NOT send batteries through the mail!