Operating Instruction ST 1800 A (01)

*2153707*
2153707 English 7
Electrical safety
▶ Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the power tool may
give you an electric shock if you damage an electric cable accidentally.
Power tool use and care
▶ Immediately switch off the power tool if the accessory tool jams. The
power tool might twist off-line.
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Overview of the product 1
@
Control switch
;
Forward / reverse switch
=
Lockbutton
%
Grip
&
Pressure transfer surface
(
Battery interface
)
Torque adjustment
+
Chuck
§
Protective cap
/
Release button with additional
function (charge status display
activation)
:
Depth gauge
∙
Depth gauge adjustment
3.2 Intended use
The product described is a hand-held cordless screwdriver for fastening
profile metal sheets, metal sheets and sandwich panels in metal construction.
The product is designed for driving and removing self-drilling and self-
tapping screws in appropriate materials and material thicknesses.
It is possible to use a stand-up tool for driving collated screws.
▶ Use only Hilti Liion batteries from the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series with these batteries.
3.3 Items supplied
Metal construction screwdriver, STDG 19 depth gauge, STDC protective
cap, SNSD 8 screwdriving bit, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Store or online at:
www.hilti.group.
3.4 Liion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are
indicated by the display on the Liion battery. The charge status of the Liion
battery is displayed after pressing one of the two battery release buttons.
Printed: 05.06.2019 | Doc-Nr: PUB / 5293039 / 000 / 04