Instructions / Assembly

Mechanical Anchoring Systems
HTB TOGGLER
®
Bolt 3.3.16
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2011 349
3.3.16.1 Product Description
3.3.16.2 Material Specifications
3.3.16.3 Technical Data
3.3.16.4 Installation Instructions
3.3.16.5 Ordering Information
3/16" & 1/4" 3/8" & 1/2"
3.3.16.1 Product Description
3.3.16.2 Material Specifications
Zinc plated metal channel material meets the requirements for AISI 1010 steel
The Hilti HTB TOGGLER
®
Bolt fastening
system consists of a metal channel
threaded to accept a machine bolt, and
unique plastic legs and locking cap for
fastening in a wide range of hollow-wall
materials.
Product Features
• Uniqueinstallationlegsandlocking
cap facilitate fastening in wide
range of drywall and hollow wall
materials up to 2-1/4" thick
• Onepiecemetalchannelprovides
greater holding power
• Plasticpullringassistsinsetting
lock cap
• Anchorisadjustableforvarious
base material thicknesses
providingeasierinstallationaswell
asminimizinginventoryinvestment
• Remainsmountedinthewall
withoutscrewforconvenient
handling, installation and reuse
• Availableinstainlesssteel
and carbon steel for different
environments
• Comprehensiveofferingwithand
without machine screws
3.3.16.4 Installation Instructions
1 Drill correct size hole into wall
cavity.
2 Position the metal channel parallel
with the plastic legs.
3 Insert the metal channel through
thedrilledholeintothewallcavity.
4 Pull the metal channel firmly
againsttheinnerwallcavitybytug-
ging the plastic pull ring.
5 Slide the plastic cap forward along
the legs until it is seated flush to
the work surface.
6 Snap the plastic legs off flush
at the plastic cap by pushing
outward.
7 Secure the item to be fastened with
the proper size machine screw and
screwdriver.NOTE:Maximum
torque on screw or rod is 5 ft-lb.
1 2 3 4 5 6 7
3.3.16.3 Technical Data
HTB TOGGLER
®
Bolt Allowable Loads
1
Toggler
Bolt
Size
in.
Hole
Dia.
in.
1/2" Drywall 5/8" Drywall Hollow Concrete Block
Tension
lb(N)
Shear
lb(N)
Tension
lb(N)
Shear
lb(N)
Tension
lb(N)
Shear
lb(N)
3/16 1/2 30 (133) 70 (311) 45 (200) 95 (423) 140 (623) 160 (712)
1/4 1/2 35 (155) 85 (378) 50 (222) 105 (467) 160 (712) 240 (1068)
3/8 3/4 35 (155) 70 (311) 50 (222) 105 (467) 200 (890) 380 (1690)
1/2 3/4 35 (155) 85 (378) 50 (222) 110 (489) 240 (1068) 420 (1868)
1 Based on using a safety factor of 4.0.
TOGGLER
®
is the registered trademark of Mechanical Plastics Corp.
3.3.16.5 Ordering Information
Description
Machine
Screw
Dia. (In.)
Machine
Screw
Length (In.)
Bit
Dia. (in.)
1
Box
Qty
HTB TOGGLER
®
Bolt 3/16" with SRH screw
1
3/16 2-1/2 1/2
100
HTB TOGGLER
®
Bolt 3/16" with PFH screw
2
3/16 2-1/2 1/2
100
HTB TOGGLER
®
Bolt 3/16" w/o screw
3
3/16
–
1/2
100
HTB TOGGLER
®
Bolt 1/4" with SRH screw
1
1/4 2-1/2 1/2
100
HTB TOGGLER
®
Bolt 1/4" with PFH screw
2
1/4 2-1/2 1/2
100
HTB TOGGLER
®
Bolt 1/4" w/o screw
3
1/4
–
1/2
100
HTB TOGGLER
®
Bolt 3/8" with SRH screw
1
3/8 2-1/2 3/4
25
HTB TOGGLER
®
Bolt 3/8" w/o screw
3
3/8
–
3/4
25
HTB TOGGLER
®
Bolt 1/2" with SRH screw
1
1/2 2-1/2 3/4
25
HTB TOGGLER
®
Bolt 1/2" w/o screw
3
1/2
–
3/4
25
1 Round Head (Combination Slotted/Phillips)
2 Phillips Flat Head
3 Machine screws not included
TOGGLER
®
is the registered trademark of Mechanical Plastics Corp.