SL 2-A12 SL 2-A22 English Printed: 21.04.
Printed: 21.04.
1 Information about the documentation 1.1 About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. • Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons. 1.2 Explanation of symbols used 1.2.
▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information Cordless lamp Generation Serial no. SL2-A12 | SL2-A22 01 1.4 Declaration of conformity We declare, on our sole responsibility, that the product described here complies with the applicable directives and standards.
▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable location, well away from flammable materials, where it can be kept under observation and left to cool down. Contact Hilti Service after the battery has cooled down. English Printed: 21.04.
3 Description 3.1 Product overview 4 English Printed: 21.04.
@ ; = % & Multi-position hinge LED bezel LED Retractable hook Automatic switch ( ) + § 3-mode switch Grip Battery Battery release button 3.2 Intended use The product described is a cordless lamp. It is intended for use as illumination on jobsites. Use the product in a dry environment only. SL 2-A12 Use only Hilti Li-ion batteries from the B 12 series with this product.
4 Technical data 4.1 Technical data Voltage Brightness Weight SL 2-A12 10.8 V 500 lm 0.65 kg (1.43 lb) SL 2-A22 21.6 V 500 lm 1.3 kg (2.9 lb) 5 Operation 5.1 Preparations at the workplace CAUTION Risk of injury! Inadvertent starting of the product. ▶ Remove the battery before making any adjustments to the power tool or before changing accessories. Observe the safety instructions and warnings in this documentation and on the product. 5.2 Inserting the battery CAUTION Electrical hazard.
5.5 Turning the lamp head CAUTION Risk of damage to the eyes (the retina). Looking directly into the lamp presents a risk of damage to the eyes (the retina). ▶ Do not direct the lamp at yourself or at anyone else. ▶ Do not, under any circumstances, look into the lamp. ▶ Turn the lamp head to the desired position. Note The lamp head can be turned in either direction along the axis. Do not attempt to force the lamp head past the end stops. 5.6 Switching on 1. Turn the lamp head to the desired position.
7 Transport and storage 7.1 Transport and storage of cordless tools Transport CAUTION Inadvertent starting during transport. Uncontrolled starting during transport may occur if the battery is fitted, thereby resulting in damage to the tool. ▶ Always remove the battery before transporting the tool. ▶ ▶ ▶ ▶ Remove the battery. Transport the tool and batteries individually packaged. Never transport batteries in bulk form (loose, unprotected).
9 Disposal WARNING Risk of injury. Hazards presented by improper disposal. ▶ Improper disposal of the equipment may have the following consequences: The burning of plastic components generates toxic fumes which may present a health hazard. Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or environmental pollution. Careless disposal may permit unauthorized and improper use of the equipment.
10 English Printed: 21.04.
Printed: 21.04.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 21.04.