Operating Instruction TE 30-A36 (03)

English 11
5.1.9 Removing the accessory tool
CAUTION
Risk of injury! The accessory tool gets hot during use.
▶ Wear protective gloves when changing the accessory tool.
▶ Do not place the hot accessory tool on readily flammable materials.
▶ Pull the chuck back as far as it will go and remove the accessory tool.
5.2 Types of work
ATTENTION
Risk of damage by incorrect handling!
▶ Do not operate the switches for direction of rotation and/or function selection during operation.
Observe the safety instructions and warnings in this documentation and on the product.
5.2.1 Function selector switch
▶ Set the function selector switch to the desired working position.
➥ Do not operate the function selector switch while the motor is running. Risk of damage!
5.2.2 Drilling without hammering
▶
Set the function selector switch to this symbol: .
5.2.3 Drilling with hammering action (hammer drilling)
▶
Set the function selector switch to this symbol: .
Printed: 30.04.2019 | Doc-Nr: PUB / 5351707 / 000 / 03