SL 6-A22 Printed: 22.10.
Printed: 22.10.
1 Information about the documentation 1.1 About this documentation 1.2 Explanation of symbols used • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. • Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons. 1.2.
These numbers refer to the corresponding illustrations found at the beginning of these operating instructions The numbering reflects the sequence of operations shown in the illustrations and may deviate from the steps described in the text Item reference numbers are used in the overview illustrations and refer to the numbers used in the product overview section This symbol is intended to draw special attention to certain points when handling the product. Wireless data transfer 1.
2 Safety 2.1 Use and care Use the product only when it is in perfect working order. Never tamper with or modify the product in any way. Keep the product out of reach of children. Do not use the product where there is a risk of fire or explosion. Use the product in a dry environment only. Replace the complete cordless lamp when the light source has reached the end of its life. The light source in this cordless lamp is not replaceable.
3 Description 3.1 Product overview @ ; = % & ( 3.2 Lamp head LEDs Vertical pivot joint Battery Switch for mode change (brightness) Locking switch, vertical ) + § / : ∙ Intended use Heat sink Carrying handle Battery state of charge indicator Battery release button Suspension/attachment hook 5/8" thread for tripod mount The product described is a cordless floodlight. It is for lighting up jobsites. The lamp head can be pivoted horizontally and vertically.
materials by means of the integral hook, or mounted on a tripod with 5/8" thread. ▶ Use only Hilti Liion batteries from the B 18 / B 22 series with this product. ▶ Use only the Hilti battery chargers of the C4/36 series to charge these batteries. 3.3 Charge state indicator Lightly press (no more than until resistance is perceptible) either of the battery release buttons to check the charge state of the Liion battery. Status 4 LEDs light up. 3 LEDs light up. 2 LEDs light up. 1 LED lights up.
4 Technical data Voltage Brightness Weight 4.1 SL 6-A22 21.6 V 3,000 lm 3.2 kg (7.1 lb) Battery Battery operating voltage Ambient temperature for operation Storage temperature Battery charging starting temperature 5 Operation 5.1 Preparations at the workplace 21.6 V −17 ℃ … 60 ℃ (1 ℉ … 140 ℉) −20 ℃ … 40 ℃ (−4 ℉ … 104 ℉) −10 ℃ … 45 ℃ (14 ℉ … 113 ℉) CAUTION Risk of injury by inadvertent starting! ▶ Before inserting the battery, make sure that the product is switched off.
5.1.3 Charging the battery 1. Before charging the battery, read the operating instructions for the charger. 2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry. 3. Use an approved charger to charge the battery. 5.1.4 Switching on Whenever you engage the product on the universal hook or mount it on a tripod, make sure that the product is secure. ▶ Select a mode by pressing the 4-mode switch. 5.1.
1. Unlock the multi-position hinge with the locking switch to adjust the lamp vertically. 2. Then turn the multi-position hinge in the desired direction. 3. Lock the multi-position hinge with the locking switch. 4. Turn the lamp head to the desired position to adjust the lamp horizontally. 6 Care and maintenance WARNING Risk of injury with battery inserted ! ▶ Always remove the battery before carrying out care and maintenance tasks! Care and maintenance of the tool • Carefully remove stubborn dirt.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com 6.1 Light source The light source in this lamp is not replaceable! When the light source reaches the end of its service life, the entire lamp has to be replaced.
Trouble or fault Possible cause Action to be taken The battery does The retaining lugs on the ▶ Clean the retaining not engage with an battery are dirty. lugs and push the audible double click. battery in until it engages. 1 LED flashes. The battery is ▶ Change the battery and charge the empty The device does not discharged. battery. work. The battery is too hot or ▶ Allow the battery to too cold. cool down or warm up slowly to room temperature.
Printed: 22.10.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 22.10.
