ABS Approval 18-HS1755518-1-PDA for X-BT-GR. X-BT-MR, X-BT-ER fastening system in off-shore and shipbuilding application

ManualsBrandsHilti ManualsFastenersX-BT-GR Stainless steel threaded studs

Confirmation of Product Type Approval

Company Name: HILTI AKTIENGESELLSCHAFT

Address: FELDKIRCHERSTR. 100, 9494 SCHAAN, Liechtenstein

Product: Fastening System

Model(s): Hilti X-BT-GR, X-BT-MR and X-BT-ER threaded fasteners

Endorsements:

Certificate Type Certificate Number Issue Date Expiry Date

Product Design Assessment (PDA)

Manufacturing Assessment (MA)

Product Quality Assurance (PQA)

18-HS1755518-1-PDA

21-4879051

11-OCT-2019

29-JUL-2021

29-JUL-2023

30-AUG-2026

Tier

3 - Type Approved, unit certification not required

Intended Service

For fastening of fastened materials to base materials of carbon steel or stainless steel in ships and in

offshore structures.

Description

Fasteners Models: X-BT-MR, X-BT-GR, X-BT-ER

Fasteners: X-BT-MR M6/14 SN 8, X-BT-MR M6/10 SN 8, X-BT-MR W6/14 SN 8, X-BT-MR W6/10 SN 8,

X-BT-MR M8/14 SN 8, X-BT-MR M10/15 SN 8, X-BT-MR W10/15 SN 8, X-BT-GR M8/7 SN 8

Grounding and bonding equipment: X-BT-ER M6/7 SN 8, X-BT-ER W6/7 SN 8, X-BT-ER W6/3 SN 8,

X-BT-ER M6/3 SN 8, X-BT-ER M10/7 SN 8, X-BT-ER W10/7 SN 8, X-BT-ER M8/7 SN 8

Drilling Tool: SF BT 22-A, SF BT 18-A, XBT 4000-A

Fastening Tool: Powder-actuated DX 351-BT/BTG, Battery-actuated BX 3-BT

Materials at least equivalent to A4/AISI grade 316 material

Ratings

1. Refer to "New Generation Hilti X-BT-GR, X-BT-MR and X-BT-ER Threaded Fastener Specification,

July 2019" for the recommended maximum tension and shear loads, in association with the 'Conditions

for recommended loads' specified therein (see attachment).

2. Service Temperature: -40 to 100 degrees Celsius

Service Restrictions

Summary of content (6 pages)

PAGE 1
Confirmation of Product Type Approval Company Name: HILTI AKTIENGESELLSCHAFT Address: FELDKIRCHERSTR.
PAGE 2
Certificate Number: 18-HS1755518-1-PDA 1) Unit Certification is not required for this product. If the manufacturer or purchaser request an ABS Certificate for compliance with a specification or standard, the specification or standard, including inspection standards and tolerances, must be clearly defined.
PAGE 3
Certificate Number: 18-HS1755518-1-PDA a) Acceptable applications: a1) The securing of grating panels a2) The securing of checker plate a3) The securing of electrical cable trays a4) The securing of electrical cable clips a5) The securing of joiner bulkhead tracks to plating in deck modules a6) The securing of light duty fixtures and light hangers a7) Securing of items (i-vi) above in fire rated divisions a8) The securing of wall panel struts a9) The securing of exterior and interior outfitting a10) The se
PAGE 4
Certificate Number: 18-HS1755518-1-PDA any application is in a jurisdiction where the fasteners are subject to the approval process or specific guidelines are to be followed, the approved technical data or design guidelines take precedence over technical data presented herein Notes, Drawings and Documentation Report No. XE-18-12, Evaluation Report New Generation X-BT 2018-05-22, Revision: -, Pages: 130 Report No.
PAGE 5
Certificate Number: 18-HS1755518-1-PDA for construction on or previous to the effective date of the ABS Rules and standards applied at the time of PDA issuance. Use of the Product for non-ABS units is subject to agreement between the manufacturer and intended client. ABS Rules Rules for Conditions of Classification, Part 1 – 2018 Steel Vessel Rules 1-1-4/7.7, 1-1-A3, 1-1-A4 ABS Rules for Conditions of Classification, Part 1 – 2018 Offshore Units and Structures 1-1-4/9.
PAGE 6
Certificate Number: 18-HS1755518-1-PDA both PDA and MA entitles the product to receive a Confirmation of Product Type Approval. Acceptance of product is limited to the “Intended Service” details prescribed in the certificate and as per applicable Rules and Standards. This Certificate is valid for installation of the listed product on ABS units which exist or are under contract for construction on or prior to the effective date of the ABS Rules and standards applied at the time of PDA issuance.