VC 75-1-A22 Printed: 30.01.
Printed: 30.01.
1 Information about the documentation 1.1 About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. • Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons. 1.2 Explanation of symbols 1.2.
1.3 Symbols on the product 1.3.1 Product-dependent symbols The following symbols are used on the product: Risk of electric shock Risk of fire Direct current (DC) Do not pick up moisture 1.4 Product information Hilti products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products. This personnel must be informed of any particular hazards that may be encountered.
▶ This product is not intended for use by persons (including children) with physical, sensory or mental disabilities or persons lacking the appropriate experience and/or knowledge. ▶ Only persons who are familiar with it, who have been trained on how to use it safely and who understand the resulting hazards are permitted to use the tool. The tool is not intended for use by children. ▶ Do not allow children to play with the product.
Electrical safety ▶ Avoid body contact with earthed / grounded surfaces such as pipes, radiators, cookers, stoves and refrigerators. There is an increased risk of electric shock if your body is grounded. ▶ Do not expose the vacuum cleaner to rain or wet conditions. Water entering a vacuum cleaner will increase the risk of electric shock. Personal safety ▶ Stay alert, watch what you are doing and use common sense when operating a power tool.
3 Description 3.1 Intended use The product described here is a vacuum cleaner suitable for commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices and by rental companies. It is suitable for dry applications only. Hilti products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products.
3.2 @ 6 Product overview EJECT button for hose English Printed: 30.01.
= % & ( ) + 3.3 Control switch Holder for shoulder strap Hand nozzle Hose Slit nozzle Catch Waste material container Suction head CLEAN button for filter cleaning Battery compartment Outlet fitting for blow function Control switch Status ECO MAX OFF 3.4 § / : ∙ $ Meaning • Energy-saving mode • Switching on • Switching off Items supplied Dry vacuum cleaner complete with filter element, suction hose with connectors, hand nozzle, crevice nozzle, shoulder strap and operating instructions.
4 Technical data Rated voltage (DC) Rated current input Weight Ambient temperature Storage temperature Maximum partial vacuum Maximum volumetric flow rate (air) 5 Operation 5.1 Preparations at the workplace VC 75-1-A22 21.6 V 16 A 5.2 kg (11.5 lb) −17 ℃ …60 ℃ (1 ℉ …140 ℉) −20 ℃ …70 ℃ (−4 ℉ …158 ℉) 11 kPa (2 psi) 35 ℓ/s (9 liq. galUS/s) Observe the safety instructions and warnings in this documentation and on the product. WARNING The appliance may be operated only by authorized, trained personnel. 5.
5.1.2 Removing the battery 1. Press both release buttons. 2. Lift the battery up and out of the appliance. 5.1.3 Changing the filter bag 1. 2. 3. 4. 5. 6. 7. Switch the appliance off. Open the two catches. Lift the suction head off the waste material container. Remove the filter bag and remove the holder for the filter bag. Push the holder for the filter bag on to a new filter bag. Secure the holder with the filter bag to the ribs of the waste material container.
5.2.1 Switching the device on / off 1. To switch on the device, turn the control switch to this position: MAX. To operate the device for a longer period at reduced suction power, set the control switch to this position: ECO. 2. To switch off the device, set the control switch to this position: OFF. 5.2.2 Blower function Before using the blower function, check that there is nothing inside the hose. Do not point the hose toward persons. 1. To disconnect the suction hose, press and hold down the EJECT button.
• Avoid ingress of moisture. Maintenance • Check all visible parts and controls for signs of damage at regular intervals and make sure that they all function correctly. • Do not operate the cordless tool if signs of damage are found or if parts malfunction. Have the tool repaired by Hilti Service immediately. • After cleaning and maintenance, fit all guards or protective devices and check that they function correctly. 6.1 Changing the filter 1. Switch the device off. 2. Open the two catches. 3.
▶ Store the tool and batteries in a place that is as cool and dry as possible. ▶ Never store batteries in direct sunlight, on heating units or behind a window pane. ▶ Store the tool and batteries in a place where they cannot be accessed by children or unauthorized persons. ▶ Check the tool and batteries for damage before use after long periods of storage.
In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information. Battery disposal Improper disposal of batteries can result in health hazards from leaking gases or fluids. ▶ DO NOT send batteries through the mail! ▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting. ▶ Dispose of your battery out of the reach of children.
14 English Printed: 30.01.
Printed: 30.01.
Printed: 30.01.
Printed: 30.01.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 30.01.
