HILTI ANCHOR ROD SPECIFICATIONS AND TECHNICAL DATA Standard pre-cut anchor rods and extended anchor rod program
As global leaders in chemical anchoring systems, Hilti has provided threaded rod for anchoring applications in materials such as concrete and masonry for many years.
Hilti Anchor Rod Specifications and Technical Data HAS AND HIT-Z ANCHOR RODS The following technical data is for HAS threaded rods and HIT-Z anchor rods available in the standard pre-cut rod program and the extended rod program.
STRENGTH DESIGN ACCORDING TO ACI 318 The following steel design information is for Hilti HAS threaded rods and HIT-Z anchor rods according to the material specifications on page 2, used in conjunction with Hilti adhesive anchors designed in accordance with ACI 318 Chapter 17. This includes Hilti HIT-HY 200, HIT-RE 500 V3, HIT-RE 100, HIT-HY 100, and HIT-ICE. Steel design information for Hilti HAS threaded rods and Hilti HIT-Z anchor rods for use with ACI 318 Chapter 17 Design Information Rod O.D.
Hilti Anchor Rod Specifications and Technical Data STRENGTH DESIGN ACCORDING TO ACI 318 The following steel design information is for Hilti HAS threaded rods according to the material specifications on page 2, used in conjunction with Hilti adhesive anchors designed in accordance with ACI 318 Chapter 17. This includes Hilti HIT-HY 200, HIT-RE 500 V3, HIT-RE 100, HIT-HY 100, and HIT-ICE. Steel design information for Hilti HAS threaded rods for use with ACI 318 Chapter 17 Design Information Rod O.D.
STRENGTH DESIGN ACCORDING TO ACI 318 The following are strength design values calculated from data on the previous pages. This is intended for adhesive anchors designed in accordance with ACI 318-14 Chapter 17 (and Appendix D for earlier editions of ACI 318) and can be used in conjunction with the Hilti Simplified Strength Design Tables (refer to Section 3.1.8 of the 2016 and 2017 Hilti Anchor Fastening Technical Guide for more information on the Hilti Simplified Tables).
Hilti Anchor Rod Specifications and Technical Data LIMIT STATES DESIGN ACCORDING TO CSA A23.3-14 The following steel design information is for Hilti HAS threaded rods and HIT-Z anchor rods according to the material specifications on page 2, used in conjunction with Hilti adhesive anchors designed in accordance with CSA A23.3-14 Annex D. This includes Hilti HIT-HY 200, HIT-RE 500 V3, HIT-RE 100, HIT-HY 100, and HIT-ICE.
LIMIT STATES DESIGN ACCORDING TO CSA A23.3-14 The following steel design information is for Hilti HAS threaded rods according to the material specifications on page 2, used in conjunction with Hilti adhesive anchors designed in accordance with CSA A23.3-14 Annex D. This includes Hilti HIT-HY 200, HIT-RE 500 V3, HIT-RE 100, HIT-HY 100, and HIT-ICE. Steel design information for Hilti HAS threaded rods for use with CSA A23.3-14 Annex D Design Information Rod O.D. HAS-R Stainless Steel ASTM A193, Gr.
Hilti Anchor Rod Specifications and Technical Data LIMIT STATES DESIGN ACCORDING TO CSA A23.3-14 The following are strength design values calculated from data on the previous pages. This is intended for adhesive anchors designed in accordance with CSA A23.3-14 Annex D and can be used in conjunction with the Hilti Simplified Strength Design Tables (refer to Section 3.1.8 of the 2016 and 2017 Hilti Anchor Fastening Technical Guide for more information on the Hilti Simplified Tables).
TECHNICAL DATA — ALLOWABLE STRESS DESIGN (ASD) The following technical data is for adhesive anchors that will be designed in accordance with the Allowable Stress Design method (ASD). This includes Hilti HIT-HY 270 for masonry, HIT-HY 200 for masonry, HIT-HY 100 for masonry, HIT-ICE, HIT-HY 10 PLUS, HIT-1, HTE 50 and HVU Capsules.
Hilti Anchor Rod Specifications and Technical Data TECHNICAL DATA — ALLOWABLE STRESS DESIGN (ASD) - CONTINUED The following technical data is for adhesive anchors that will be designed in accordance with the Allowable Stress Design Method (ASD). This includes Hilti HIT-HY 270 for masonry, HIT-HY 200 for masonry, HIT-HY 100 for masonry, HIT-ICE, HIT-HY 10 PLUS, HIT-1, HTE 50 and HVU Capsules.
ORDERING INFORMATION Hilti HIT-Z Anchor rods for Hilti HIT-HY 200 Anchoring system HIT-Z Carbon Steel 12 HIT-Z-R 316 Stainless Steel Hilti Rods are now stamped on the end to show grade of steel and overall anchor length! HIT-Z (-R) Length Code Description Qty Description Qty 3/8" x 3-3/8" 40 3/8" x 3-3/8" 40 D 3/8" x 4-3/8" 40 3/8" x 4-3/8" 40 F 3/8"x 5-1/8" 40 3/8"x 5-1/8" 40 H 3/8" x 6-3/8" 40 3/8" x 6-3/8" 40 J 1/2" x 4-1/2" 20 1/2" x 4-1/2" 20 F 1/2" x 6-1/2" 20 1/2"
Hilti Anchor Rod Specifications and Technical Data Overview of the Hilti HAS standard off-the-shelf anchor rod program for Hilti chemical anchoring systems1 HAS-V does not come with chisel point HAS-V-36 1 HAS-E, HAS-B, and HAS-R all come with chisel point HAS-E-55 HAS-B-105 HDG Hot-dipped galvanized HAS-B-105 HAS-R 304 Stainless Steel HAS-R 316 Stainless Steel Description Qty Description Qty Description Qty Description Qty Description Qty Description Qty - - 3/8" x 3" 20 - - - -
EXTENDED HILTI ANCHOR ROD PROGRAM ORDERING INFORMATION The following threaded rod ordering information is for the Hilti extended rod program according to the material specifications on page 2. Extended rod offering Material Nominal anchor diameter (in.) Electro plated Min. length in. Max. length in.
Hilti Anchor Rod Specifications and Technical Data In the US: Hilti, Inc. (U.S.) 7250 Dallas Parkway, Suite 1000, Dallas, TX 75024 Customer Service: 1-800-879-8000 en español: 1-800-879-5000 Fax: 1-800-879-7000 In Canada: Hilti (Canada) Corporation 2360 Meadowpine Blvd. Mississauga, Ontario, L5N 6S2 Customer Service: 1-800-363-4458 Fax: 1-800-363-4459 www.hilti.com www.hilti.ca Hilti is an equal opportunity employer. Hilti is a registered trademark of Hilti, Corp. ©Copyright 2018 by Hilti, Inc. (U.S.
