C 4/12-50 Printed: 03.01.
Printed: 03.01.
C 4/12-50 Manual de instruções original Printed: 03.01.
Printed: 03.01.
1 Indicações sobre a documentação 1.1 Sobre esta documentação 1.2 Explicação dos símbolos • Antes da colocação em funcionamento, leia esta documentação. Esta é a condição para um trabalho seguro e um manuseamento sem problemas. • Tenha em atenção as instruções de segurança e as advertências nesta documentação e no produto. • Guarde o manual de instruções sempre junto do produto e entregue-o a outras pessoas apenas juntamente com este manual. 1.2.
A numeração reproduz uma sequência dos passos de trabalho na imagem e pode divergir dos passos de trabalho no texto Na figura Vista geral são utilizados números de posição que fazem referência aos números da legenda na secção Vista geral do produto Este símbolo pretende despertar a sua atenção durante o manuseamento do produto. 1.3 Símbolos dependentes do produto 1.3.
2 Segurança 2.1 Normas de segurança gerais para ferramentas eléctricas AVISO Leia todas as normas de segurança e instruções. O não cumprimento das normas de segurança e instruções pode resultar em choque eléctrico, incêndio e/ou lesões graves. Guarde bem todas as normas de segurança e instruções para futura referência. Segurança no posto de trabalho ▶ Mantenha a sua área de trabalho limpa e bem iluminada. Locais desarrumados ou mal iluminados podem ocasionar acidentes.
trabalho com ferramentas eléctricas. Um momento de distracção ao operar a ferramenta eléctrica pode causar ferimentos graves. ▶ Use equipamento de segurança. Use sempre óculos de protecção. Equipamento de segurança, como, por exemplo, máscara antipoeiras, sapatos de segurança antiderrapantes, capacete de segurança ou protecção auricular, de acordo com o tipo e aplicação da ferramenta eléctrica, reduzem o risco de lesões. ▶ Evite um arranque involuntário.
ser reparadas antes da utilização da ferramenta. Muitos acidentes são causados por ferramentas eléctricas com manutenção deficiente. ▶ Mantenha as ferramentas de corte sempre afiadas e limpas. Acessórios com gumes afiados tratados correctamente emperram menos e são mais fáceis de controlar. ▶ Utilize a ferramenta eléctrica, acessórios, bits, etc., de acordo com estas instruções. Tome também em consideração as condições de trabalho e o trabalho a ser efectuado.
▶ Certifique-se de que as baterias não são danificadas mecanicamente. ▶ Baterias danificadas (por exemplo, com fissuras, peças partidas, contactos dobrados, empurrados para trás e/ou puxados para fora) não podem ser carregadas nem continuar a ser utilizadas. 2.3 Utilização e manutenção de baterias 6 Português ▶ Observe as regras específicas sobre transporte, armazenagem e utilização de baterias de iões de lítio. ▶ Mantenha as baterias afastadas de temperaturas elevadas, radiação solar directa e fogo.
3 Descrição 3.1 Vista geral do produto Bateria Indicador do estado de funcionamento e indicador do estado de carga da bateria @ ; 3.2 = % & LED 1 LED 2 Interface da bateria Utilização correcta O produto descrito é um carregador para baterias Hilti de iões de lítio com uma tensão nominal de 10,8 V. Consoante a versão nacional, destina-se à ligação a tomadas com 100 a 127 V ou 220 a 240 V de tensão alternada. No final desta documentação encontrará uma lista das baterias aprovadas para este produto.
3.3 Elementos de indicação 3.3.1 Elementos de indicação no carregador e na bateria Indicação LED 1 Indicação LED 2 Significado no carregador desligado desligado Alimentação eléctrica inexistente ou carregador avariado pisca a vermelho desligado Bateria demasiado quente ou demasiado fria. aceso a verde desligado Carregador operacional aceso a verde pisca a verde Bateria a carregar. aceso a verde aceso a verde Bateria totalmente carregada aceso a vermelho desligado Avaria no carregador. 3.3.
5.2 Carregar a bateria 1. Certifique-se de que os contactos da bateria e do carregador estão limpos e secos. ➥ No final desta documentação encontrará as baterias aprovadas para este produto. 2. Empurre a bateria para dentro da interface do carregador. Preste atenção para que a codificação da bateria coincida com a da interface. ➥ O processo de carregamento inicia automaticamente assim que a bateria é colocada no carregador. A indicação do estado de carga na bateria está desactivada durante o carregamento.
Avaria LED 1 aceso a verde, LED 2 apagado. LED 1 pisca a vermelho, LED 2 apagado. LED 1 aceso a vermelho, LED 2 apagado. 7 Causa possível Solução Bateria eventualm. dani- ▶ Puxe a bateria para ficada. fora do carregador. Se as luzes permanecerem apagadas após activação da indicação do estado de carga na bateria, a bateria está danificada. Mande verificar a bateria no Serviço de Assistência Técnica Hilti.
Manutenção AVISO Perigo devido a choque eléctrico! Reparações incorrectas em peças eléctricas podem causar ferimentos e queimaduras graves. ▶ As reparações na parte eléctrica apenas podem ser executadas por um electricista especializado. • Verificar, regularmente, todos os componentes visíveis quanto a danos e os comandos operativos quanto a funcionamento perfeito. • Em caso de danos e/ou perturbações de funcionamento, não operar o produto.
9 Garantia do fabricante 12 Português ▶ Em caso de dúvidas quanto às condições de garantia, contacte o seu parceiro Hilti local. Printed: 03.01.
Printed: 03.01.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 03.01.