Safety Data Sheet (SDS) for CI 060-EP Crack Injection System

Hilti Crack Injection System CI 060
Safety information for 2-Component-products
Issue date: 08/02/2021 Revision date: 08/02/2021 Supersedes: 24/08/2016 Version: 8.1
08/02/2021
US-OSHA - en
1/24
SECTION 1: Kit identification
1.1 Product identifier
Product name
Product code
1.2 Details of the supplier of the Safety information for 2-Component-products
Hilti, Inc.
Legacy Tower, Suite 1000
7250 Dallas Parkway
TX 75024 Plano - USA
T +1 9724035800
1-800-879-8000 toll free - F +1 918 254 0522
SECTION 2: General information
A SDS for each of these components is included. Please do not separate any component SDS from this cover page
SECTION 3: Kit contents
Classification of the Product
GHS-US classification
Acute Tox. 4 (Oral)
H302 -
Harmful if swallowed.
Acute Tox. 4 (Dermal)
H312 -
Harmful in contact with skin.
Skin Corr. 1
H314 -
Causes severe skin burns and eye damage.
Skin Sens. 1
H317 -
May cause an allergic skin reaction.
Muta. 2
H341 -
Suspected of causing genetic defects.
Aquatic Acute 1
H400 -
Very toxic to aquatic life.
Aquatic Chronic 1
H410 -
Very toxic to aquatic life with long lasting effects.
Label elements
GHS US labelling
Hazard pictograms (GHS US)
GHS05
GHS07
GHS08
GHS09
Signal word (GHS US)
Danger
Hazard statements (GHS US)
Harmful if swallowed or in contact with skin
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Suspected of causing genetic defects.
Very toxic to aquatic life.
Very toxic to aquatic life with long lasting effects.
Precautionary statements (GHS US)
Do not breathe dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin: Wash with plenty of water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
If exposed or concerned: Get medical advice/attention.

Summary of content (24 pages)