ON!Track smart tag AI T380 Printed: 25.04.
Printed: 25.04.
1 Information about the documentation 1.1 • • • About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. Observe the safety instructions and warnings in this documentation and on the product. Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons. 1.2 Explanation of symbols used 1.2.
Keep all safety instructions and other instructions for future reference. General safety instructions ▶ Do not cover a type identification plate or other labels. ▶ Do not cover any openings in the casing of the item of equipment. ▶ Do not obstruct switches, displays and warning lights. ▶ To avoid surface damage or chemical reactions, check that the adhesive is compatible with the surface before applying the ON!Track smart tag. ▶ Keep away from children. 3 Description 3.
Technical data 5.1 Technical data Protection class IP 67 Operating temperature −20 ℃ …65 ℃ (−4 ℉ …149 ℉) Dimensions Storage temperature Battery (not replaceable) Battery life (at room temperature) Communication standard Signal range (can vary greatly depending on surrounding conditions) Signal interval Frequency Maximum emitted transmission power 6 Operation 6.1 Activation 38 mm x 28 mm x 11 mm (1.5'' x 1.1'' x 0.4'') −25 ℃ …80 ℃ (−13 ℉ …176 ℉) CR2032 button cell 3 years Bluetooth® 4.
.2 Deactivation 1. Start the Hilti ON!Track app and select Deactivation from the menu. Deactivation is possible only using an Android device with NFC functionality. 2. To begin deactivation, hold the ON!Track smart tag against the back of the smartphone, so that both are in contact. 3. Move the ON!Track smart tag over the back of smartphone in order to find the position of the NFC antenna. The position of the NFC antenna on each smartphone model is different.
11 FCC statement (applicable in US) / IC statement (applicable in Canada) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6 English Printed: 25.04.
Printed: 25.04.
Printed: 25.04.
Printed: 25.04.
*2182310* 2182310 Hilti = registered trademark of Hilti Corp., Schaan Printed: 25.04.