Operating Instruction AG 6D-22 (01)

8 English 2282187
*2282187*
Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the product could give you an electric shock or cause an explosion if you
accidentally damage an electric cable or a gas or water pipe.
▶ Dirty or dusty products that have been used frequently for work on conductive materials should be
checked at regular intervals by Hilti Service. Dust (especially dust from conductive materials) or
dampness adhering to the surface of the power tool may, under unfavorable conditions, lead to electric
shock.
Workplace
▶ Apply appropriate safety measures at the opposite side of the workpiece in work that involves breaking
through. Pieces of debris could drop out and / or fall down and injure other persons.
▶
Slits cut in load-bearing walls of buildings or other structures may influence the statics of the structure,
especially when steel reinforcing bars or load-bearing components are cut through. Consult the
responsible structural engineer, architect or person in charge of the building project before beginning the
work.
3 Description
3.1 Product overview 1
@
Guard release button
;
Spindle lock button
=
Lockable on/off switch
%
Battery status indicator
&
Battery release button
(
Battery
)
Spark guard
+
Air vents
§
Main grip with SensTech function
/
Side handle
:
Threaded bushing for the side handle
∙
Standard guard with front cover
$
Clamping flange with O-ring
£
Abrasive cut-off wheel / abrasive grinding
wheel
|
Clamping nut
¡
Kwik lock quick-release lock nut (optional)
Q
Pin wrench
3.2 Intended use
The product described is a hand-held cordless angle grinder. It is designed for cutting and grinding metal
and mineral materials, brushing, sanding and for hole cutting in tiles, all without use of water.
▶ The tool can be used for cutting, slitting and grinding mineral materials only in combination with the
appropriate guard.
▶ A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.