Operating Instruction SC 4WL-22 (01)

10 English 2276129
*2276129*
3.6 Fence
Use of the single arm fence allows precise cuts to be made along the edge of the workpiece, or strips of
even width to be cut.
The fence can be fitted on either side of the base plate.
4 Technical data
4.1 Product
Rated voltage
21.6 V
Weight without battery
3.0 kg
(6.6 lb)
Saw blade diameter
160 mm … 165 mm
(6.3 in … 6.5 in)
Saw blade disc thickness
0.5 mm … 1.5 mm
(0.02 in … 0.06 in)
Kerf width
1.5 mm … 2 mm
(0.06 in … 0.1 in)
Saw blade arbor size
15.8 mm
(0.62 in)
Rated speed under no load
4,000 /min
Maximum cutting depth
57 mm
(2.2 in)
Bevel cutting angle
0° … 50°
Storage temperature
−20 ℃ … 70 ℃
(−4 ℉ … 158 ℉)
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
4.2 Battery
Battery operating voltage
21.6 V
Weight, battery
See the end of these
operating instructions
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature
−10 ℃ … 45 ℃
(14 ℉ … 113 ℉)
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.