Operating Instruction AG 4S-22 (02)

*2272270*
2272270 English 11
ATTENTION! When cutting or slitting with abrasive cut-off wheels always use the standard guard with
the additional front cover, or a fully enclosing dust hood.
Wheels
Type Application Designation Material
Abrasive cut-off wheel Cutting, slitting ACD Metal
Diamond cut-off wheel Cutting, slitting DCD (SPX, SP, P) Mineral
Abrasive grinding wheel Rough grinding AGD, AFD, AND Metal
Diamond grinding wheel Rough grinding DGCW (SPX, SP,
P)
Mineral
Wire brush Wire brushes 3CS, 4CS, 3SS,
4SS
Metal
Abrasive resin-fiber wheel Rough grinding AP-D Metal
Suitability of wheels for the equipment used
Item Equipment ACD AP-D AGD,
AFD,
AND
DG-CW
(SPX, SP,
P)
DC-D
(SPX, SP,
P)
3CS, 4CS,
3SS, 4SS,
A Guard (standard) ✓ ✓ ✓ ✓ ✓ ✓
B Front cover (in
combination with
A)
✓ — — — ✓ —
C Dust hood (grinding)
DGEX 125⁄5"
— — — ✓ — —
D Dust hood (cutting)
DCEX 125⁄5"C (in
combination with A)
— — — — ✓ —
E DC-EX 125/5"M dust
hood for slitting
— — — — ✓ —
F DCEX SL adapter (in
combination with E)
— — — — ✓ —
G Side handle (stan-
dard)
✓ ✓ ✓ ✓ ✓ ✓
H Clamping nut (stan-
dard)
✓ — ✓ ✓ ✓ —
I Clamping flange
(standard)
✓ — ✓ ✓ ✓ —
J
Kwik lock (optional
instead of H)
✓ — — — ✓ —
K Clamping nut (abra-
sive resin-fiber
wheel)
— ✓ — — — —
L Support plate (abra-
sive resin-fiber
wheel)
— ✓ — — — —
5 Technical data
AG 4S-22-5
Rated voltage
21.6 V
Rated speed
8,500 /min
Maximum wheel diameter
5 in
Weight without battery
2.1 kg
(4.6 lb)
Drive spindle thread
5/8"-11