Operating Instruction AG 4S-22 (02)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Product overview
- 3.2 Intended use
- 3.3 Status indicators of the Li-ion battery
- 3.4 Items supplied
- 3.5 ATC
- 3.6 Motor protection function
- 3.7 Integrated brake
- 3.8 Front cover
- 3.9 DC-EX 125/5 C compact dust hood for cutting (accessory)
- 3.10 DC-EX 125/5M dust hood for cutting (accessory)
- 3.11 DG-EX 125/5 dust hood for grinding (accessory)
- 4 Consumables
- 5 Technical data
- 6 Preparations at the workplace
- 7 Operation
- 8 Care and maintenance
- 9 Transport and storage of cordless tools and batteries
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
- 13 Further information
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Affichages de l'accu Li-Ion
- 3.4 Éléments livrés
- 3.5 ATC
- 3.6 Fonction de protection du moteur
- 3.7 Frein intégré
- 3.8 Cache avant
- 3.9 Capot dépoussiéreur (tronçonnage) DC-EX 125/5 C capot compact (accessoire)
- 3.10 Capot dépoussiéreur (tronçonnage) DC-EX 125/5M (accessoires)
- 3.11 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 4 Consommables
- 5 Caractéristiques techniques
- 6 Préparatifs
- 6.1 Recharge de l'accu
- 6.2 Introduction de l'accu
- 6.3 Retrait de l'accu
- 6.4 Montage de la poignée latérale
- 6.5 Montage ou démontage du carter de protection
- 6.6 Montage ou démontage du cache avant
- 6.7 Montage de la sécurité anti-chute Hilti (en option)
- 6.8 Sécurité anti-chute
- 6.9 Montage ou démontage des outil amovibles
- 7 Utilisation
- 8 Nettoyage et entretien
- 9 Transport et stockage des outils sur accu et des accus
- 10 Aide au dépannage
- 11 Recyclage
- 12 Garantie constructeur
- 13 Informations complémentaires
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Mostrar la batería Ion-Litio
- 3.4 Suministro
- 3.5 ATC
- 3.6 Función de protección del motor
- 3.7 Freno integrado
- 3.8 Tapa delantera
- 3.9 Protector antipolvo (tronzado) DC-EX 125/5 C Cubierta compacta (accesorios)
- 3.10 Protector antipolvo (cortar) DC-EX 125/5M (accesorio)
- 3.11 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 4 Material de consumo
- 5 Datos técnicos
- 6 Preparación del trabajo
- 6.1 Carga de la batería
- 6.2 Colocación de la batería
- 6.3 Extracción de la batería
- 6.4 Montaje de la empuñadura lateral
- 6.5 Montaje y desmontaje de la caperuza protectora
- 6.6 Montaje y desmontaje de la tapa delantera
- 6.7 Montaje de la protección en caso de caída de Hilti (opcional)
- 6.8 Protección frente a caídas
- 6.9 Montaje y desmontaje del útil
- 7 Manejo
- 8 Cuidado y mantenimiento
- 9 Transporte y almacenamiento de las baterías y sus herramientas
- 10 Ayuda en caso de averías
- 11 Reciclaje
- 12 Garantía del fabricante
- 13 Más información
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Indicações da bateria de iões de lítio
- 3.4 Incluído no fornecimento
- 3.5 ATC
- 3.6 Função de protecção do motor
- 3.7 Travão incorporado
- 3.8 Tampa dianteira
- 3.9 Dispositivo de extracção de pó (cortar) DC-EX 125/5 C Resguardo compacto (acessório)
- 3.10 Dispositivo de extracção de pó (cortar) DC-EX 125/5M (acessório)
- 3.11 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 4 Consumíveis
- 5 Características técnicas
- 6 Preparação do local de trabalho
- 7 Utilização
- 8 Conservação e manutenção
- 9 Transporte e armazenamento de ferramentas a bateria e baterias
- 10 Ajuda em caso de avarias
- 11 Reciclagem
- 12 Garantia do fabricante
- 13 Mais informações
16 English 2272270
*2272270*
7 Operation
7.1 Switching on
1. Press the rear section of the on/off switch.
2. Slide the on/off switch forward.
▶ The motor runs.
3. Lock the on/off switch.
7.2 Grinding
WARNING
Risk of injury. The accessory tool may suddenly stick or stall.
▶ Use the product with the side handle fitted and always hold the product securely with both hands.
Do not allow the accessory tool to jam and avoid excessive pressure on the product.
7.3 Cutting
▶ When cutting, keep the rate of advance moderate and do not tilt the product or the cut-off wheel to either
side (working position is at approx. 90° to the cutting plane).
For best results when cutting profiles and small rectangular tube, start cutting with the cut-off
wheel at the smallest cross-section.
7.4 Rough grinding
WARNING
Risk of injury. The abrasive cut-off wheel could shatter and flying fragments may cause injury.
▶ Never use abrasive cut-off wheels for grinding.
▶ Move the product to and fro while maintaining a 5° to 30° angle of attack and applying moderate pressure.
▶ This will avoid overheating and discoloration of the workpiece and help ensure an even surface finish.
7.5 Switching off
▶ Press the rear section of the on/off switch.
▶ The on/off switch jumps into the off position and the motor stops.
8 Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
DANGER
Electric shock due to breakdown of protective insulation. When working on metal under extreme
conditions, conductive dust (e.g. metal, carbon fiber) may accumulate inside the power tool, thereby
adversely affecting the protective insulation.
▶ Use a stationary dust extraction system when working under extreme conditions.
▶ Clean the air vents frequently.
Care of the product
• Carefully remove stubborn dirt.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
• Use a dry, clean cloth to clean the contacts of the product.
Care of the Liion batteries
• Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.