Operating Instruction AG 4S-22 (02)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Product overview
- 3.2 Intended use
- 3.3 Status indicators of the Li-ion battery
- 3.4 Items supplied
- 3.5 ATC
- 3.6 Motor protection function
- 3.7 Integrated brake
- 3.8 Front cover
- 3.9 DC-EX 125/5 C compact dust hood for cutting (accessory)
- 3.10 DC-EX 125/5M dust hood for cutting (accessory)
- 3.11 DG-EX 125/5 dust hood for grinding (accessory)
- 4 Consumables
- 5 Technical data
- 6 Preparations at the workplace
- 7 Operation
- 8 Care and maintenance
- 9 Transport and storage of cordless tools and batteries
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
- 13 Further information
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Affichages de l'accu Li-Ion
- 3.4 Éléments livrés
- 3.5 ATC
- 3.6 Fonction de protection du moteur
- 3.7 Frein intégré
- 3.8 Cache avant
- 3.9 Capot dépoussiéreur (tronçonnage) DC-EX 125/5 C capot compact (accessoire)
- 3.10 Capot dépoussiéreur (tronçonnage) DC-EX 125/5M (accessoires)
- 3.11 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 4 Consommables
- 5 Caractéristiques techniques
- 6 Préparatifs
- 6.1 Recharge de l'accu
- 6.2 Introduction de l'accu
- 6.3 Retrait de l'accu
- 6.4 Montage de la poignée latérale
- 6.5 Montage ou démontage du carter de protection
- 6.6 Montage ou démontage du cache avant
- 6.7 Montage de la sécurité anti-chute Hilti (en option)
- 6.8 Sécurité anti-chute
- 6.9 Montage ou démontage des outil amovibles
- 7 Utilisation
- 8 Nettoyage et entretien
- 9 Transport et stockage des outils sur accu et des accus
- 10 Aide au dépannage
- 11 Recyclage
- 12 Garantie constructeur
- 13 Informations complémentaires
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Mostrar la batería Ion-Litio
- 3.4 Suministro
- 3.5 ATC
- 3.6 Función de protección del motor
- 3.7 Freno integrado
- 3.8 Tapa delantera
- 3.9 Protector antipolvo (tronzado) DC-EX 125/5 C Cubierta compacta (accesorios)
- 3.10 Protector antipolvo (cortar) DC-EX 125/5M (accesorio)
- 3.11 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 4 Material de consumo
- 5 Datos técnicos
- 6 Preparación del trabajo
- 6.1 Carga de la batería
- 6.2 Colocación de la batería
- 6.3 Extracción de la batería
- 6.4 Montaje de la empuñadura lateral
- 6.5 Montaje y desmontaje de la caperuza protectora
- 6.6 Montaje y desmontaje de la tapa delantera
- 6.7 Montaje de la protección en caso de caída de Hilti (opcional)
- 6.8 Protección frente a caídas
- 6.9 Montaje y desmontaje del útil
- 7 Manejo
- 8 Cuidado y mantenimiento
- 9 Transporte y almacenamiento de las baterías y sus herramientas
- 10 Ayuda en caso de averías
- 11 Reciclaje
- 12 Garantía del fabricante
- 13 Más información
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Indicações da bateria de iões de lítio
- 3.4 Incluído no fornecimento
- 3.5 ATC
- 3.6 Função de protecção do motor
- 3.7 Travão incorporado
- 3.8 Tampa dianteira
- 3.9 Dispositivo de extracção de pó (cortar) DC-EX 125/5 C Resguardo compacto (acessório)
- 3.10 Dispositivo de extracção de pó (cortar) DC-EX 125/5M (acessório)
- 3.11 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 4 Consumíveis
- 5 Características técnicas
- 6 Preparação do local de trabalho
- 7 Utilização
- 8 Conservação e manutenção
- 9 Transporte e armazenamento de ferramentas a bateria e baterias
- 10 Ajuda em caso de avarias
- 11 Reciclagem
- 12 Garantia do fabricante
- 13 Mais informações
2 English 2272270
*2272270*
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols can be used on the product:
Wear eye protection
Rated speed
Revolutions per minute
Revolutions per minute
Diameter
Direct current (DC)
Do not work with the standard guard when carrying out cutting work.
Always work with both hands.
The product supports near-field communication (NFC) technology compatible with iOS and
Android platforms.
Li-ion battery
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Angle grinder AG 4S-22-5
Generation 02
Serial no.
1.5 Declaration of conformity
2 Safety
2.1 General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.