CFP-ES Endo Shield LEED Reporting Letter

Hilti, Inc.
5400 S outh 122
nd
East Avenue
Tulsa, OK 74146
1-800-879-8000
www.hilti.com
January 21, 2022
To Whom It May Concern:
Re: CFP-ES Endo-Shield
Item Numbers:
2331829
The Hilti CFP-ES Endo-Shield is manufactured in New York.
There is no post-consumer or post-industrial content in CFP-ES Endo-Shield and it cannot be recycled. The CFP-ES Endo-
Shield does not contain any Rapidly Renewable Materials. The VOC content for CFP-ES Endo-Shield is 1 gram/liter.
CFP-ES Endo-Shield is not regulated as a hazardous waste by the Federal EPA Standards. The regulations for the disposal of
non-regulated industrial waste can vary from state to state and even city to city. For this reason, you should consult your local
and state regulatory agencies for direction on disposal.
Please feel free to contact me at [phone] if you have questions.
Sincerely,
Jerry Metcalf MPH, CHMM
Sr. Manager Safety/Environmental
Hilti Inc.
918 872 3704
[e-mail]
Rev. Date: 01/21/2022
The manufacturing plant location on this certificate has been provided for LEED reporting purposes only. It should never be
used for Country of Origin certification or a representation of compliance/non-compliance with Buy American or Buy America
requirements, as those requirements differ.
The manufacturing plant location(s) identified on the certificate represent standard Hilti catalog products only. “Specially”
produced non-catalog Hilti products may have differing manufacturing plant locations.
Contact your Hilti representative in cases of “specially” produced products for a custom LEED certificate.