Operating Instruction DX 76 (01)

12 EC declaration of conformity (original)
Designation: Powder-actuated fasten-
ing tool
Type: DX 76
Generation: 01
Year of design: 2004
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend Tassilo Deinzer
Head of Quality & Processes Manage-
ment
Head of BU Direct Fastening
BU Direct Fastening BU Direct Fastening
04/2013 04/2013
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
13 Confirmation of CIP testing
The Hilti DX 76 has been system and type tested. As a
result, the tool bears the rectangular PTB approval mark
showing approval number S 813. Hilti thus guarantees
compliance with the approved type. Unacceptable de-
fects or deficiencies, etc. determined during use of the
tool must be reported to the person responsible at the ap-
proval authority (PTB) and to the Office of the Permanent
International Commission (C.I.P.).
14 Health and safety of the operator
14.1 Noise information
Powder-actuated fastening tool
Type DX 76
Model Series
Caliber 6.8/18 blue
Power regulation 4
Application Fastening to 8 mm steel (400 MPa) with X-ENP 19
L15MX
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Noise (power) level, L
WA, 1S
1
114 dB (A)
Emission noise-pressure level in the work station,
L
pA, 1s
2
110 dB (A)
Peak sound pressure emission level, L
pC, peak
3
139 dB (C)
1
±2dB(A)
2
±2dB(A)
3
±2dB(C)
Operation and set-up conditions: Set-up and operation of the pin driver in accordance with E DIN EN 15895-1 in the
semi-anechoic test room of Müller-BBM GmbH. The ambient conditions in the test room conform to DIN EN ISO 3745.
Testing procedure: Enveloping surface method in anechoic room on reflective surface area in accordance with
E DIN EN 15895, DIN EN ISO 3745 and DIN EN ISO 11201.
en
16
Printed: 17.04.2014 | Doc-Nr: PUB / 5126040 / 000 / 02