Product Data Sheet for Shower and Floor Drain

Hilti Firestop
Saving lives
through innovation
and education
Product Information
Hilti. Outperform. Outlast.
Hilti, Inc. (U.S.) 1-800-879-8000 • www.us.hilti.com • en español 1-800-879-5000 • Hilti Firestop Systems Guide
Shower and Floor Drain
Product description
■ An economical solution to address shower and oor drain applications
■ The same trusted restop material as the tub box
■ Two variations: (1) extended sleeve and (2) hub coupling
■ Designed to accommodate solvent welding to 2" PVC pipes
Product dimensions
■ Extended Sleeve: 5 -3/4" base diameter 8" height
■ Hub Coupling: 5-3/4" base diameter; 2-13/16" height
Application dimensions
■ Extended Sleeve: 2-3/8" inner diameter (for use with 2"PVC pipe)
■ Hub Coupling: 2-3/8" inner diameter (for use with 2" PVC pipe)
Minimum slab thickness
■ 4-1/2"
Color
■ Extended Sleeve: red ange with white extended sleeve
■ Hub Coupling: red ange with white hub coupling
Aerator Adapters
Product description
■ When used in conjunction with the appropriate cast-in place
device, creates an underside void for the installation of a single
stack waste pipe aerator system
Product features
■ Up to a 4-1/2" recess created in the slab to reduce nal ceiling
height
■ Allows for vertical, horizontal and angle movement to simplify
plumbing installations
■ Excellent sound insulation
For use with
■ Soil and Aerator assemblies
Technical Data Aerator-Adapter
Product dimensions (LxWxH)
3": 6" x 6-7/8" x 3"
4": 6" x 8-3/4" x 4-1/2"
Void created
3": 5-3/4" x 2-3/8" (DxH)
4": 5-7/8" x 7.5" x 4-1/2" (LxWxH)
Minimum slab thickness
4-1/2"
Color
Red
Storage
Store in dry location
Tested in accordance with
• UL 1479 • ASTM E 814 • ASTM G21
Notice
• Before handling, read Material Safety Data Sheet and
product label for safe usage and health information.
• Instructions below are general guidelines — always
refer to the applicable drawing in the UL Fire
Resistance Directory or Hilti Firestop Systems Guide
for complete installation information
Note: Before purchasing aerator adapters for your
project, please confirm the following:
• aerators may be employed on the project as per
local codes and construction allowances
• minimum concrete floor slab thickness
Instructions for use
1. Secure the assembly to the floor deck using nails or
screws.
2. Attach the Aerator Adapter to the appropriate cast-in
place device.
3. Before pouring concrete, confirm that the cover cap
of the assembly is properly secured. This will help
prevent flowing concrete into the CP 680-P/M during
the concrete pour.
4. Complete installation by installing cast iron aerator
and pipe.
Installation instructions for Aerator Adapter
1 2 3 4