Product Technical Guide for MIC-PG Low-Friction Insert

Hilti MI/MQ Technical Guide
3.4 MI Components, Allowable Load Data and Specications
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I MI/MQ Technical Guide 2015
67
MIC-PG Low friction insert for sliding support
MIC-PS90/120 Sliding Support Clamps
5
1
/
8
" (130)
4 "
(102)
1
/
2
" (12)
11
/
16
" (18)
3
9
/
16
" (90)
1
3
/
4
" (45)

5
1
/
8
" (130)
4 "
(102)
1
/
2
" (13)
11
/
16
" (18)
1
/
4
" (6)
1
3
/
16
" (30)

Note: pipe ring sold separately.
Ordering Information
Description For Girder Type Weight Per Set lb (kg) Qty Item No.
1
MIC-PG
MI-90/MI-120 0.8 (0.4) 16 00304842
1 Includes sixteen Kwik Togs to secure MIC-PG to a girder hole.
Material Specications
Material
PE-UHMW
Friction value
= 0.15
Temperature resistance
-238°F to 176°F
Material Specications
Material
S235JRG2 (DIN EN10025),
ASTM A1011 (34)
Galvanizing
Hot-dip galvanized 1.8 mils (45 μm)
Technical Data
Technical Data
Allowable loads
Loading: ± Fy (lb) ± Fx (lb) + Fz (lb)
Fz
– – 6740
Allowable loads
1, 2, 3
Loading: ± Fy (lb) ± Fx (lb) ± Fz (lb)
Fx or Fz**
– 940 -1350 + 6740
1 Values apply only to one clamp. Install appropriate spacers so there is no clamping force
between the attached parts thus allowing unrestricted movement in the y-axis (i.e., Fy = 0).
2 Must be used in pairs.
3 Tightening torque = 62 ft-lb.
Ordering Information
Description For Girder Type
Weight Per Set
lb (kg) Qty Item No.
MIC-PS90
 MI-90 3.9 (1.8) 4 pairs 00304838
MIC-PSP-6MM
 MI-90/MI-120 0.7 (0.3) 5 pairs 00283594
Kwik Tog
MIC-PG