Installation Guide

Mechanical Anchoring Systems
3.3.14 Metal Hit Anchor
346 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2011
3.3.14.1 Product Description
3.3.14.2 Material Specifications
3.3.14.3 Technical Data
3.3.14.4 Installation Instructions
3.3.14.5 Ordering Information
3.3.14.4 Installation Instructions
1
2 3 4
1. Drill hole at least 1/4" deeper
than anchor.
2. Clean hole. 3. Install anchor through fixture. 4. Hammer in nail until nail head
is flush with anchor body. Do
not overdrive.
3.3.14.2 Material Specifications
Bodymaterial:Aluminum/ZincAlloy
DrivePin:ZincplatedcarbonsteelconformingtoAISI1018.Type304StainlessSteel
(Stainless Steel Version)
The Hilti Metal Hit Anchor is a drive-in
type expansion anchor consisting of a
zinc plated or stainless steel drive pin
and an alloy expanding body for light
duty fastenings in concrete
and masonry.
Product Features
• Quickandeasyfasteningfor
maximum speed and installation
• Lowprofilemushroomheadstyle
provides a clean, tamper proof
fastening
• Anchordesignallowseasy
through-type fastenings even in
bottomless holes
• Consistentloadvaluesprovide
light duty fastenings in concrete
and masonry
• Choiceofstainlesssteelorcarbon
steel finish allows outdoor or
indoor use
3.3.14.1 Product Description
3.3.14.3 Technical Data
Metal Hit Allowable Loads in Normal Weight Concrete
Anchor
Size
in.
Embed.
Depth
in. (mm)
Concrete Hollow Concrete block Red Clay block
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
2000psi 4000psi 2000psi
3/16 5/8 (16) – – – 180 (0.8) 180 (0.8) – –
1/4 3/4 (19) 135 (0.6) 210 (0.9) 280 (1.2) 255 (1.1) 320 (1.4) 180 (0.8) 280 (1.2)
1/4 1 (25) 160 (0.7) 240 (1.1) 315 (1.4) 310 (1.4) 320 (1.4) 245 (1.1) 290 (1.3)
For overhead application reduce the allowable load values by a factor of 2.
3.3.14.5 Ordering Information
Description
Carbon
Item No.
Stainless
Item No.
Bolt Diameter
1
In. Box Qty
Metal Hit 3/16" x 7/8"
66137
N/A 3/16
100
Metal Hit 1/4" x 3/4"
15538
N/A 1/4
100
Metal Hit 1/4" x 1"
66138 230567
1/4
100
Metal Hit 1/4" x 1-1/4"
66139 230568
1/4
100
Metal Hit 1/4" x 1-1/2"
66140 230569
1/4
100
Metal Hit 1/4" x 2"
45453 230570
1/4
100