VOC_CDPH_CP777_EN

COMPLIANCE TESTED
by
berkeley analytical
VOC Emission Test Certificate
Product Name: CP777
Product Sample Information
Certificate Information
Company: Hilti Inc. Certificate No: 180326-02
Company Website: www.hilti.com
Certified By:
Product Type: Firestop plugs for decking flutes
Raja S. Tannous, Laboratory Director
Date Produced: 2/14/2018 Date: March 26, 2018
Reference Standard: California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017
(Emission testing method for CA Specification 01350)
Acceptance Criteria and Results Demonstrating Compliance of Product Sample to Referenced Standard:
Individual VOCs of Concern
2
Formaldehyde
3
TVOC
4
Criterion Compliant? Criterion Compliant? Range
School Classroom ≤½ Chronic REL YES ≤9.0 µg/m
3
YES ≤ 0.5 mg/m
3
≤½ Chronic REL
YES
≤9.0 µg/m
3
YES
≤ 0.5 mg/m
3
Product Coverage
5
:
Not applicable
1. Exposure scenarios & product quantities for classroom & office are defined in Tables 4-2 – 4-5 (CDPH Std. Mtd. V1.2-2017)
2. Maximum allowable concentrations of individual target VOCs are specified in Table 4-1 (ibid.)
3. Maximum allowable formaldehyde concentration is ≤9 µg/m
3
, effective Jan 1, 2012; previous limit was ≤16.5 µg/m
3
(ibid.)
4. Informative only; predicted TVOC Range in three categories, i.e., 0.5 mg/m
3
, >0.5 4.9 mg/m
3
, and ≥5.0 mg/m
3
5. Informative and applicable only to tests of wet-applied products; grams of sample applied per square meter of substrate
Standards & Codes Recognizing CDPH Standard Method V1.2 (partial list)
USGBC LEED Version 4, BD&C, ID&C
The WELL Building Standard
ANSI/GBI 01, Green Building Assessment Protocol
CALGreen, CA Code of Regulations Title 24, Part II
Narrative: Hilti Inc. selected a sample representative of its CP777 product and submitted it on 2/26/2018 for testing. Berkeley
Analytical measured and evaluated the emissions of VOCs from this sample following CDPH/EHLB/Standard Method V1.2-2017. The
results of the test are presented in Berkeley Analytical report, 1031-001-01A-Mar2618. The technical data sheet showing the
application for which the test results were evaluated is attached.
Berkeley Analytical is an independent, third-party laboratory specializing in the analysis of organic chemicals emitted by and contained in building
products, finishes, furniture, and consumer products. We are an ISO/IEC 17025 accredited laboratory (IAS, TL-383
); all standards used in performing
this test are in Berkeley Analytical’s scope of accreditation.
DISCLAIMER: THIS CERTIFICATE OF COMPLIANCE AFFIRMS THAT: 1) A SAMPLE OF THE LISTED PRODUCT WAS TESTED ACCORDING TO THE REFERENCED STANDARD;
2) THE MEASURED VOC EMISSIONS FROM THE SAMPLE WERE EVALUATED FOR THE DEFINED EXPOSURE SCENARIO(S); AND 3) THE RESULTS MEET THE ACCEPTANCE
CRITERIA OF THE REFERENCED STANDARD(S). BERKELEY ANALYTICAL IS NOT RESPONSIBLE FOR ANY CLAIMS REGARDING A PRODUCT OR PRODUCTS ENTERED INTO
COMMERCE THAT MAY BE BASED ON THIS TEST. BERKELEY ANALYTICAL PROVIDES THIS CERTIFICATE OF COMPLIANCE “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
©2012 Berkeley Analytical, 815 Harbour Way South, Suite 6, Richmond, CA 94804 / 510-236-2325 / www.berkeleyanalytical.com
FC17B.2

Summary of content (2 pages)