HIT-HY 70 Hybrid Adhesive for Masonry Flexible, strong and reliable. Hilti. Outperform. Outlast.
Hilti Adhesive Anchor Flexible, strong and reliable. HIT-HY 70 Masonry Adhesive Anchoring System Applications • Retrofits of historic masonry buildings, including seismic retrofit of multi-wythe walls • Sign, fence or awning attachment to masonry wall or façade Life just got easier with one adhesive anchoring product to solve all your masonry needs.
Hilti Adhesive Anchor HIT-HY 70 Hybrid Adhesive for Masonry Construction 1.1 Product Description The Hilti HIT-HY 70 Adhesive Anchor System is used to anchor building components to light-, medium-, or normal-weight grout-filled concrete masonry units (CMU), hollow (ungrouted) CMU, solid brick, hollow brick, multiwythe un-reinforced (URM) solid brick masonry*, and hollow core concrete. Guide Specifications HIT-HY 70 is an injectable twocomponent hybrid adhesive mortar.
Hilti Adhesive Anchor 1.2 Material Specifications Material Properties for HIT-HY 70 — Cured Adhesive Compressive Strength ASTM D695/DIN 53454 7,252-10,153 psi 50-70 MPa Modulus of elasticity (Compression test) ASTM D790/DIN 53452 246,568 psi 1,700 MPa Water Absorption ASTM D570/DIN 53495 3-8 % 3-8 % Electrical Resistance VDE/DIN 0303T3 2.705 - 1012 ohm/in. 1.065 - 1012 ohm/cm Mechanical Properties Material Specifications fy min.
Hilti Adhesive Anchor 1.3 Technical Data HIT-HY 70 Allowable Adhesive Bond Tension Loads for Threaded Rods and Reinforcing Bars in the Face of Grout-Filled Concrete Masonry Units1, 2, 7, 8, 9, 10, 11, 12 Anchor Diameter, in. (mm) or Bar Size Spacing4 Embedment, in. (mm)3 Load @ ccr and scr, lb (kN) No. 3 3-3/8 (85.7) 1240 (5.5) 1/2 No. 4 (12.7) 4-1/2 (114.3) 5/8 No. 5 (15.9) 3/4 No. 6 (19.1) 3/8 (9.5) Edge Distance5 Load Reduction Factor @ smin6 Critical, ccr, in. (mm) 13.5 (342.9) 0.
Hilti Adhesive Anchor 1.3 Technical Data HIT-HY 70 Allowable Adhesive Bond Loads for Threaded Rods and Reinforcing Bars in the Top of Grout-Filled Concrete Masonry Units1, 2, 3, 4, 8, 9 Shear Load, lb (kN) 7 Anchor Diameter, in. (mm) or Bar Size Embedment, in. (mm) 1/2 (12.7) 4-1/2 (114.3) 5/8 (15.9) 5-5/8 (142.9) No. 4 4-1/2 (114.3) No. 5 5-5/8 (142.9) Edge Distance, in. (mm)5, 6 Minimum End Distance, in.
Hilti Adhesive Anchor 1.3 Technical Data HIT-HY 70 Allowable Adhesive Bond Tension Loads for HIS-N inserts in the Face of Grout-Filled Concrete Masonry Units1, 2, 7, 8, 9, 11,12 Spacing4 Anchor Diameter, in. (mm) Embedment, in. (mm)3 Load @ ccr and scr, lb (kN) 3/8 (9.5) 4-3/8 (111) 2072 (9.2) 17 (431.8) 1/2 (12.7) 5 (127) 2708 (12.1) 20 (508) Edge Distance5 Minimum, smin, in. (mm) Critical, scr, in. (mm) Load Reduction Factor @ smin6 Critical, ccr, in. (mm) 0.55 12 (304.8) 0.
Hilti Adhesive Anchor 1.3 Technical Data HIT-HY 70 Allowable Adhesive Bond Loads for Threaded Rods in the Face of Hollow Concrete Masonry Units1, 3, 7, 9 Anchor Diameter, in. (mm) Embedment, in. (mm)2 1/4 (6.4) 5/16 (7.9) 3/8 (9.5) Tension Load, lb (kN)4, 5, 8 Minimum Edge Distance, cmin, in. (mm)6 215 (1.0) 2 (50.8) 1/2 (12.7) 390 (1.7) 390 (1.7) 4 (101.6) 390 (1.7) Edge Distance6 Shear Load @ ccr, lb (kN)4, 5, 8 Critical, ccr, in. (mm) 355 (1.6) 4 (101.6) 630 (2.8) 12 (304.8) 640 (2.
Hilti Adhesive Anchor 1.3 Technical Data HIT-HY 70 Allowable Adhesive Bond Loads for Threaded Rods in the Face of Hollow Brick1, 3, 4, 7, 9 Anchor Diameter, in. (mm) Embedment, in. (mm)2 Minimum Edge Tension Load, Distance, cmin, lb (kN)5, 8 in. (mm) Shear Load @ ccr, lb (kN)5, 8 1/4 (6.4) 530 (2.4) 370 (1.6) 5/16 (7.9) 735 (3.3) 595 (2.6) 3/8 (9.5) 3-1/8 (79.4) 905 (4.0) 1/2 (12.7) 6-3/8 (162) 905 (4.0) 1045 (4.6) Edge Distance6 Critical, ccr, in. (mm) Minimum, cmin, in.
Hilti Adhesive Anchor 1.3 Technical Data HIT-HY 70 Allowable Adhesive Bond Seismic Loads for Threaded Rods and Reinforcing Bars in Unreinforced Brick Masonry1, 2, 3 Configuration A — Shear Anchor or Rebar Dowel (Figure 4) Anchor Diameter, in. (mm) or Bar Size 1/2 (12.7) No. 4 5/8 (15.9) No. 5 3/4 (19.1) No. 6 Embedment, in. (mm) 8 (203.2) Minimum Wall Thickness, in. (mm) 13 (330.2) Tension Load, lb (kN) Shear Load 4, lb (kN) - 500 (2.22) - 750 (3.34) - 1000 (4.
Hilti Adhesive Anchor 1.3 Technical Data HIT-HY 70 Allowable Adhesive Bond Loads for Threaded Rods in Hollow Core Concrete Panels1, 4, 5, 6 Hanger Threaded Rod Size, in. (mm) Embedment, in. (mm) 2 Required Concrete Thickness, in. (mm) 3 Tension Load, lb (kN) Shear Load, lb (kN) 3/8 (9.5) 2 (50.8) 1-3/8 (34.9) 450 (2.0) 560 (2.5) 1 All values are for anchor installed in hollow core concrete with minimum compressive strength of 7,000 psi.
Hilti Adhesive Anchor 1.3 Technical Data -5 ... 0 10 min 23 – 32 1 ... 5 10 min 33 – 41 6 ... 10 7 min 42 – 50 Influence of base material temperature on work time, cure time, and 11 ... 20 of Hilti HIT-HY 4 min 70 51on – 68bond strength 21 ... 30 2 min 69 – 86 Gel and Cure Time Gel and Cure Time Table (Approximate) 31Table ... 40 (Approximate) 1 min 87 – 104 23 – 32 33 – 41 42 – 50 51 – 68 69 – 86 87 – 104 -5 ... 0 1 ... 5 6 ... 10 11 ... 20 21 ... 30 31 ...
Hilti Adhesive Anchor 1.4 Installation Parameters Hollow CMU and Clay Brick with Holes Approximate number of trigger pulls Approximate number of trigger pulls Grout-Filled CMU Hilti, Inc. (USA) 1-800-879-8000 I www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.
Hilti Adhesive Anchor 1.4 Installation Parameters Solid Brick Multi-Wythe Wall Hilti HIT-HY 70 Rebar Rebar #4 #5 #6 Rebar Ø 12 Ø 16 Ø 20 HIT-SC 26x200 HIT-SC 26x200 d0 [inch] h0 [inch] hef [inch] HIT-RB 1 81⁄4 8 1 d0 [mm] h0 [mm] hef [mm] HIT-RB 26 210 20 28 16 14 Hilti, Inc. (USA) 1-800-879-8000 I www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.
January 24, 2012 To Whom It May Concern: Re: Hilti HIT HY 70 Adhesive Anchor – LEED Info The Hilti HIT HY 70 Adhesive is manufactured in Germany. The amount of post-consumer and post-industrial material in the Hilti HIT HY 70 Adhesive is not known and it cannot be recycled. The Hilti HIT HY 70 Adhesive does not contain any Rapidly Renewable Materials. The VOC content in Hilti HIT HY 70 Adhesive is 24.0 g/l. Hilti HIT HY 70 Adhesive is not regulated as a hazardous waste by the Federal EPA Standards.
ICC-ES Evaluation Report ESR-3342 Issued July 1, 2012 This report is subject to renewal August 1, 2013. www.icc-es.org | (800) 423-6587 | (562) 699-0543 DIVISION: 04 00 00—MASONRY Section: 04 05 19.16—Masonry Anchors REPORT HOLDER: HILTI, INC. 5400 SOUTH 122nd EAST AVENUE TULSA, OKLAHOMA 74146 (800) 879-8000 www.us.hilti.com HiltiTechEng@us.hilti.com EVALUATION SUBJECT: HILTI HIT-HY 70 ADHESIVE ANCHOR SYSTEM IN UNREINFORCED MASONRY 1.
ESR-3342 | Most Widely Accepted and Trusted 4.1.1 Configuration A, Threaded Rods or Steel Reinforcing Bars in Shear (Shear Anchor or Rebar Dowel): Configuration A is the anchor assembly resisting shear loads only. Configuration A consists of a 3/4-inchdiameter (19.1 mm), ASTM A307 threaded rod or a No. 4, No. 5 or No. 6 reinforcing bar and a 1-inch-diameter-by-8inch-long (26 mm by 200 mm) plastic-mesh screen tube (HIT-SC 26x200). Figure 1 shows details of an installed shear-resisting assembly. 4.1.
ESR-3342 | Most Widely Accepted and Trusted rotating manner to force the adhesive into the hole. Figure 2 illustrates an anchor installed in this configuration. Figure 3 illustrates the MPII, also referred to as IFU. 4.4 Field Tests: a. b. Tests for in-place mortar shear strength of the building must be done in accordance with Section A106.3.3 of the IEBC or UCBC. In-place mortar shear strength testing shall indicate a minimum mortar strength of 50 psi (345 kPa).
ESR-3342 | Most Widely Accepted and Trusted Page 4 of 7 TABLE 1—HILTI’S GEL AND CURING TIMES FOR HILTI HIT-HY 70 ADHESIVE MINIMUM BASE MATERIAL TEMPERATURE 1 GEL TIME 2 CURING TIME °F °C 41 5 10 minutes 4 hours 42-50 6-10 7 minutes 2.5 hours 51-68 11-20 4 minutes 1.5 hours 69-86 21-30 2 minutes 30 minutes 87-104 31-40 1 minute 20 minutes 3 5 For SI: °C = /9 (°F – 32). 1 The temperatures listed above refer to the base-material temperature, not ambient air temperature.
ESR-3342 | Most Widely Accepted and Trusted Page 5 of 7 FIGURE 1—HILTI HIT-HY 70 ADHESIVE SHEAR ANCHOR OR DOWEL (CONFIGURATON A) 1 FIGURE 2—HILTI HIT-HY 70 ADHESIVE 22 /2° COMBINATION ANCHOR (CONFIGURATION B)
ESR-3342 | Most Widely Accepted and Trusted Page 6 of 7 FIGURE 3—HILTI HIT-HY 70 ADHESIVE MANUFACTURER’S PUBLISHED INSTALLATION INSTRUCTIONS (MPII)
ESR-3342 | Most Widely Accepted and Trusted Page 7 of 7 FIGURE 3—HILTI HIT-HY 70 ADHESIVE MANUFACTURER’S PUBLISHED INSTALLATION INSTRUCTIONS (MPII) (Continued)
MSDS No.: Revision No.: Revision Date: Page: ® 338 000 01/18/12 1 of 2 MATERIAL SAFETY DATA SHEET Product name: HIT-HY 70 Description: Methacrylate adhesive mortar for anchor and rebar fastenings. Supplier: Hilti, Inc. P.O. Box 21148, Tulsa, OK 74121 Emergency # (Chem-Trec.
Routes of Exposure: Dermal. Carcinogenicity: IARC classifies crystalline silica (quartz sand) as a Gp I carcinogen based upon evidence among workers in industries where there has been long-term and chronic exposure (via inhalation) to silica dust; e.g. mining, quarry, stone crushing, refractory brick and pottery workers. This product does not pose a dust hazard; therefore, this classification is not relevant. Medical Conditions Aggravated by Exposure: Eye, skin, and respiratory conditions.