MSDS

ManualsBrandsHilti ManualsKitchenHIT HY 200-R Injectable Mortar

Page 1/7

Material Safety Data Sheet

acc. to ISO 11014

Printing date 10/12/2012 Reviewed on 10/12/2012Version number 2

35.0.20

Identification of the substance/mixture and of the company/undertaking

Product identifier

Trade name: Hilti HIT-HY 200-R

Container size:

330 ml, 500 ml

Relevant identified uses of the substance or mixture and uses advised against

Sector of Use

Building and construction work

Application of the substance / the preparation

Adhesive anchoring system for rebar and anchor fastenings in concrete.

Details of the supplier of the safety data sheet

Manufacturer/Supplier:

Hilti, Inc.

5400 South 122nd East Ave.

US-Tulsa, OK 74146

Phone: (800) 879-8000

Fax: (800) 879-7000

Español: (800) 879-5000

Information department:

see section 16

Emergency telephone number:

Chem-Trec

Tel.: 1 800 424 9300

Hazards identification

Classification of the substance or mixture

GHS07

H319 Causes serious eye irritation.

Skin Sens. 1 H317 May cause an allergic skin reaction.

Classification according to Directive 67/548/EEC or Directive 1999/45/EC

Xi; Sensitising

R43: May cause sensitization by skin contact.

O; Oxidizing

R7: May cause fire.

Information concerning particular hazards for human and environment:

The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest

valid version.

Classification system:

The classification was made according to the latest editions of the EU-lists, and expanded upon from company and literature data.

Label elements

GHS label elements

The product is classified and labelled according to the Globally Harmonized System (GHS).

Hazard pictograms

GHS07

Signal word

Warning

Hazard-determining components of labelling:

methacrylic acid, monoester with propane-1,2-diol

dibenzoyl peroxide

Hazard statements

H319 Causes serious eye irritation.

H317 May cause an allergic skin reaction.

Precautionary statements

P262 Do not get in eyes, on skin, or on clothing.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352 IF ON SKIN: Wash with plenty of soap and water.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue

rinsing.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P337+P313 If eye irritation persists: Get medical advice/attention.

(Contd. on page 2)

USA

Summary of content (7 pages)

PAGE 1
Page 1/7 Material Safety Data Sheet acc.
PAGE 2
35.0.20 Page 2/7 Material Safety Data Sheet acc. to ISO 11014 Printing date 10/12/2012 Version number 2 Reviewed on 10/12/2012 Trade name: Hilti HIT-HY 200-R (Contd. of page 1) · Classification system · NFPA ratings (scale 0-4) 2 1 OX 1 Health = 2 Fire = 1 Reactivity = 1 · Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable.
PAGE 3
5.0.20 Page 3/7 Material Safety Data Sheet acc. to ISO 11014 Printing date 10/12/2012 Version number 2 Reviewed on 10/12/2012 Trade name: Hilti HIT-HY 200-R (Contd. of page 2) · Information for doctor · Most important symptoms and effects, both acute and delayed Allergic reactions · Indication of any immediate medical attention and special treatment needed No further relevant information available.
PAGE 4
35.0.20 Page 4/7 Material Safety Data Sheet acc. to ISO 11014 Printing date 10/12/2012 Version number 2 Reviewed on 10/12/2012 Trade name: Hilti HIT-HY 200-R (Contd. of page 3) Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin. · Breathing equipment: Not required. · Protection of hands: Protective gloves. EN 374 / EN 388 Avoid direct contact with the chemical/ the product/ the preparation by organizational measures.
PAGE 5
Page 5/7 Material Safety Data Sheet acc. to ISO 11014 Printing date 10/12/2012 Version number 2 Reviewed on 10/12/2012 Trade name: Hilti HIT-HY 200-R (Contd. of page 4) 10 Stability and reactivity · Reactivity · Chemical stability · Thermal decomposition / conditions to be avoided: To avoid thermal decomposition do not overheat. No decomposition if used and stored according to specifications.
PAGE 6
35.0.20 Page 6/7 Material Safety Data Sheet acc. to ISO 11014 Printing date 10/12/2012 Version number 2 Reviewed on 10/12/2012 Trade name: Hilti HIT-HY 200-R (Contd.
PAGE 7
Page 7/7 Material Safety Data Sheet acc. to ISO 11014 Printing date 10/12/2012 Version number 2 Reviewed on 10/12/2012 Trade name: Hilti HIT-HY 200-R (Contd. of page 6) 16 Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Relevant phrases H241 Heating may cause a fire or explosion. H317 May cause an allergic skin reaction.