MSDS

Page 3/7
Material Safety Data Sheet
acc. to ISO 11014
Printing date 10/12/2012 Reviewed on 10/12/2012Version number 2
Trade name: Hilti HIT-HY 200-R
(Contd. of page 2)
35.0.20
·
Information for doctor
·
Most important symptoms and effects, both acute and delayed
Allergic reactions
·
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Firefighting measures
·
Extinguishing media
·
Suitable extinguishing agents
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Sand
·
For safety reasons unsuitable extinguishing agents
Water with full jet.
·
Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Carbon monoxide (CO)
Carbondioxide (CO2)
Nitrogen oxides (NOx)
In certain fire conditions, traces of other toxic gases cannot be excluded.
·
Advice for firefighters
·
Protective equipment:
Wear self-contained respiatory protective device.
6 Accidental release measures
·
Personal precautions, protective equipment and emergency procedures
Wear protective clothing.
Ensure adequate ventilation
·
Environmental precautions:
Do not allow to penetrate the ground/soil.
·
Methods and material for containment and cleaning up:
Pick up mechanically.
Clean the affected area carefully; suitable cleaners are:
organic solvent
Ensure adequate ventilation.
Dispose contaminated material as waste according to item 13.
·
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
·
Handling
·
Precautions for safe handling
Check the expiry date: see imprint on manifold (month/year). Do not use expired mortar!
The usual precautionary measures for handling chemicals should be followed.
·
Information about protection against explosions and fires:
No special measures required.
Keep ignition sources away - Do not smoke.
·
Conditions for safe storage, including any incompatibilities
·
Storage
·
Requirements to be met by storerooms and receptacles:
Keep in a cool, dry and dark place; 41 °F / 5 °C to 77 °F / 25 °C.
·
Information about storage in one common storage facility:
Store away from foodstuffs.
·
Further information about storage conditions:
Protect from heat and direct sunlight.
·
Storage class
As per VCI (1991) storage classification concept.
11
·
Specific end use(s)
Adhesive anchoring system for rebar and anchor fastenings in concrete.
*
8 Exposure controls/personal protection
·
Additional information about design of technical systems:
No further data; see item 7.
·
Control parameters
·
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
The product has a pasty consistency. Exposure limit values for respirable dusts ar not relevant for this product.
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure controls
·
Personal protective equipment
·
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be followed.
Do not eat, drink, smoke or sniff while working.
Keep away from foodstuffs, beverages and feed.
(Contd. on page 4)
USA