MSDS

Page 4/7
Material Safety Data Sheet
acc. to ISO 11014
Printing date 10/12/2012 Reviewed on 10/12/2012Version number 2
Trade name: Hilti HIT-HY 200-R
(Contd. of page 3)
35.0.20
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
·
Breathing equipment:
Not required.
·
Protection of hands:
Protective gloves.
EN 374 / EN 388
Avoid direct contact with the chemical/ the product/ the preparation by organizational measures.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
·
Material of gloves
Nitrile rubber, NBR
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
·
Not suitable are gloves made of the following materials:
Natural rubber, NR
Leather gloves
Strong gloves
·
Eye protection:
Tightly sealed goggles.
EN 166 / EN 170
·
Body protection:
Protective work clothing.
*
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Pasty
Color:
Component A: grey
Component B: white
·
Odor:
Ester-like
·
Odour threshold:
Not determined
·
pH-value:
Componente A: not applicable
Componente B: ~ 7
·
Change in condition
Melting point/Melting range:
Not determined.
Boiling point/Boiling range:
undetermined
·
Flash point:
Component A: > 109 °C (DIN 53213)
Component B: not applicable
·
Flammability (solid, gaseous)
Not determined
·
Ignition temperature:
355°C (671 °F)
·
Decomposition temperature:
Component A: not relevant
Component B: SADT 65°C UN test H4
·
Auto igniting:
Product is not selfigniting.
·
Danger of explosion:
Product does not present an explosion hazard.
·
Explosion limits:
Lower:
Not determined
Upper:
Not determined
·
Vapor pressure at 20°C (68 °F):
< 0.1 hPa (< 0 mm Hg)
·
Density at 20°C (68 °F):
1.8 g/cm³ (15.021 lbs/gal) (DIN 51757)
·
Relative density
Not determined
·
Vapour density
Not determined
·
Evaporation rate
Not determined
·
Solubility in / Miscibility with
Water:
Not miscible or difficult to mix
·
Partition coefficient (n-octanol/water):
Not determined
·
Viscosity:
dynamic at 20°C (68 °F):
50 Pa.s (DIN 53788)
kinematic at 20°C (68 °F):
> 20 s (DIN 53211/4)
·
Solvent separation test
Not determined
·
Solvent content:
Organic solvents:
None
Water:
Component B: ~ 20%
·
Other information
No further relevant information available.
USA
(Contd. on page 5)