SID 2-A Operating instructions en Manual de instrucciones es Mode d’emploi Manual de instruções Printed: 12.11.
1 ௹ ௺ ௺ This Product is Certified Ce produit est homologué Producto homologado por Este produto está registrado C US Printed: 12.11.
2 3 4 Printed: 12.11.
5 6 7 Printed: 12.11.
ORIGINAL OPERATING INSTRUCTIONS SID 2-A cordless impact screwdriver It is essential that the operating instructions are read before the power tool en is operated for the first time. Always keep these operating instructions together with the power tool. Ensure that the operating instructions are with the power tool when it is given to other persons. Contents 1 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . .
1 General information 1.1 Safety notices and their meaning DANGER Draws attention to imminent danger that will lead to serious bodily injury or en fatality. WARNING Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality. CAUTION Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage to the equipment or other property. NOTE Draws attention to an instruction or other useful information. 1.
Symbols Return materials for recycling Direct current Rated speed under no load Forward rotation Reverse rotation Location of identification data on the power tool The type designation can be found on the type identification plate and the serial number on the side of the motor housing. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department. Type: Generation: 01 Serial no.: 2 Description 2.
personnel must be informed of any special hazards that may be encountered. The power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed. Observe the national health and safety requirements. en 2.2 Items supplied 1 SID 2-A cordless impact screwdriver 1 Operating instructions Accessories can be found at your Hilti Center or online at www.hilti.com. 2.
3 Technical data Right of technical changes reserved. Power tool SID 2A Rated voltage 10.8 V Weight 1.1 kg (2.43 lb) Rated speed under no load 0…2,500/min Impact speed Max. 3,410/min Chuck ¹/₄" hex. socket with locking sleeve Battery B 12/2.6 Rated voltage 10.8 V Capacity 2.6 Ah Energy capacity 28.08 Wh Weight 0.24 kg (0.53 lb) Type of cell Liion en 4 Safety instructions NOTE The safety rules in section 4.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. en 4.1.2 Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your en hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
4.1.5 Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery packs. en Use of any other battery packs may create a risk of injury and fire.
g) The appliance is not intended for use by debilitated persons who have received no special training. Keep the appliance out of reach of children. h) Dust from materials, such as paint containing lead, some wood species, concrete / masonry / stone containing silica, and minerals as well as metal, may be harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory or other diseases to the operator or en bystanders.
d) Avoid ingress of moisture. Moisture in the interior of the tool may cause a short circuit and chemical reactions resulting in burns to the skin or fire. e) Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries. f) Observe national and international transport regulations when shipping batteries (transportation by road, rail, sea or air). en g) Remove the battery before storing or transporting the tool. h) Avoid short circuiting the battery terminals.
2. CAUTION A falling battery may present a risk of injury to yourself and others. Check that the battery is seated securely. 5.3 Removing the battery 3 1. Press the release button. en 2. Pull the battery out of the cordless impact screwdriver towards the front. 5.4 Belt hook (accessory) 4 CAUTION Check that the belt hook is fitted securely before beginning work. The belt hook can be used to attach the cordless impact screwdriver to a belt worn close to the body.
6.3 Changing bits CAUTION Wear protective gloves when changing insert tools as the insert tools get hot during use. NOTE en The power tool is equipped with a ¹/₄" hex. socket with locking sleeve that accepts various accessories such as drill bits, screwdriving bits and bit holders. Check that the connection end of the accessory is clean. Clean the connection end if necessary. 6.3.1 Fitting a bit 6 1. Remove the battery from the cordless impact screwdriver. 2. Push the locking sleeve on the hex.
Clean the outside of the cordless impact screwdriver at regular intervals with a slightly damp cleaning cloth. Do not use a spray, steam pressure cleaning equipment or running water for cleaning. This may negatively affect the electrical safety of the cordless impact screwdriver. 7.2 Battery care en In order to achieve maximum battery life, stop drawing power from the battery as soon as a significant drop in battery performance is noticed.
Fault Possible cause The power tool or the Electrical fault. battery gets very hot. en Remedy Switch the tool off immediately, remove the battery and contact Hilti Service. The power tool has been Use the right power tool overloaded (application for the job (don’t use a limits exceeded). low-powered tool for heavy work). 9 Disposal CAUTION Improper disposal of the equipment may have serious consequences: the burning of plastic components generates toxic fumes which may present a health hazard.
10 Manufacturer’s warranty - tools Please contact your local Hilti representative if you have questions about the warranty conditions. en 15 Printed: 12.11.
Hilti Corporation Printed: 12.11.2014 | Doc-Nr: PUB / 5206158 / 000 / 00 2081237 Hilti = registered trademark of Hilti Corp., Schaan Pos. 3 | 20141007 *2081237* LI-9494 Schaan Tel.: +423 / 234 21 11 Fax: +423 / 234 29 65 www.hilti.
