Operating Instruction GX 3 (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Loading the setting tool
- 6 Driving fasteners
- 7 Unloading the setting tool
- 8 Optional operating steps
- 9 Remedying possible malfunctions
- 10 Care and maintenance
- 11 Transport and storage
- 12 Troubleshooting
- 13 Disposal
- 14 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Équipement livré
- 3.4 Canons
- 3.5 Éléments de fixation
- 3.6 Curseur de réglage de la profondeur d'implantation et déverrouillage du canon
- 3.7 Touche RESET
- 3.8 Pied d'appui
- 3.9 Patte d'accrochage à la ceinture
- 3.10 Cartouche de gaz
- 3.11 Indication du niveau de charge de la cartouche de gaz
- 4 Caractéristiques techniques
- 5 Chargement du cloueur
- 6 Implantation d'éléments de fixation
- 7 Déchargement du cloueur
- 8 Opérations optionnelles
- 9 Dépannage
- 10 Nettoyage et entretien
- 11 Transport et stockage
- 12 Aide au dépannage
- 13 Recyclage
- 14 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Guía clavos
- 3.5 Elementos de fijación
- 3.6 Corredera para el ajuste de la profundidad de fijación y el desbloqueo del guía clavos
- 3.7 Tecla RESET (reinicio)
- 3.8 Pie de apoyo
- 3.9 Colgador de cinturón
- 3.10 Carga de gas
- 3.11 Indicador del estado de la carga de gas
- 4 Datos técnicos
- 5 Carga de la fijadora
- 6 Colocación de elementos de fijación
- 7 Descarga de la fijadora
- 8 Pasos de manejo opcionales
- 8.1 Comprobación del estado de la carga de gas
- 8.2 Extracción del cargador
- 8.3 Colocación del cargador
- 8.4 Extracción del guía clavos
- 8.5 Colocación del guía clavos
- 8.6 Desmontaje del pie de apoyo
- 8.7 Montaje del pie de apoyo
- 8.8 Colocación del adaptador para una fijación única
- 8.9 Retirada del adaptador para una fijación única
- 9 Reparación de averías
- 10 Cuidado y mantenimiento
- 11 Transporte y almacenamiento
- 12 Ayuda en caso de averías
- 13 Reciclaje
- 14 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização correcta
- 3.3 Incluído no fornecimento
- 3.4 Guias de pregos
- 3.5 Elementos de fixação
- 3.6 Cursor para ajuste da profundidade de fixação e desbloqueio da guia de pregos
- 3.7 Tecla RESET
- 3.8 Pé de apoio
- 3.9 Gancho de cinto
- 3.10 Lata de gás
- 3.11 Indicação do estado da lata de gás
- 4 Características técnicas
- 5 Carregamento da ferramenta de fixação
- 6 Fixação de elementos de fixação
- 7 Descarga da ferramenta de fixação
- 8 Passos de operação opcionais
- 9 Resolução de avarias
- 10 Conservação e manutenção
- 11 Transporte e armazenamento
- 12 Ajuda em caso de avarias
- 13 Reciclagem
- 14 Garantia do fabricante
*2126636*
2126636 English 11
10 Care and maintenance
10.1 Caring for the fastening tool
▶ Never operate the fastening tool if the cooling air slots are blocked.
▶ Keep the grip areas free from oil and grease.
▶ Clean the fastening tool regularly. → page 11
▶ Do not use spray devices, pressure jet washers or running water for cleaning.
▶ Do not use cleaning agents containing silicone.
▶ Do not use sprays or similar lubricating and cleaning agents.
10.2 Cleaning the fastening tool
1. Remove the gas can. → page 9
2. Unload the magazine. → page 9
3. Remove plastic fragments from the fastener guide.
4. Use a dry brush to clean the cooling air slots, taking care to prevent dirt or foreign objects entering the
interior of the tool.
5. Use a damp cloth to clean the exterior of the tool.
11 Transport and storage
11.1 Maintenance
▶
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.group.
▶ Check all external parts of the fastening tool for signs of damage at regular intervals and make sure that
all the controls function correctly.
▶ Do not use the fastening tool if parts are damaged or if the controls do not function correctly.
▶ Have a defective fastening tool repaired by Hilti Service.
11.2 Checks after care and maintenance work
▶
Move the fastener driving depth adjustment slider to the + position.
12 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
Malfunction Possible cause Action to be taken
Fasteners are frequently
driven to inadequate depth.
Driving power is too low. ▶ Move the fastener driving depth
adjustment slider to the +
position.
The fasteners are too long. ▶ Use shorter fasteners.
The supporting material is too
hard.
▶ Consider using a DX fastening
tool.
The inlet/outlet valve is clogged or
covered over.
▶ Clean the fastening tool and
check how it is held.
Printed: 07.06.2018 | Doc-Nr: PUB / 5261663 / 000 / 02