Installation Guide
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Inserting the battery
- 5.2 Fitting the belt hook (optional)
- 5.3 Fitting an accessory tool
- 5.4 Removing the accessory tool
- 5.5 Fitting an accessory tool
- 5.6 Removing the accessory tool
- 5.7 Setting the torque
- 5.8 Setting forward or reverse rotation
- 5.9 Screwdriving
- 5.10 Switching on
- 5.11 Switching off
- 5.12 Removing the battery
- 6 Care, maintenance, transport and storage
- 7 Troubleshooting
- 8 Disposal
- 9 Manufacturer’s warranty
8
@
Hex. socket (SID)
;
Illumination
=
Forward/reverse selector switch with safety
lock
%
Control switch (with electronic speed
control)
&
Square drive (SIW)
(
Torque selector button
)
Belt hook (optional)
+
Battery state of charge indicator
§
Release buttons (B18/B22 battery)
/
Release button (B14 battery)
3.2 Intended use
The product described is a hand-held cordless impact screwdriver. It is designed for driving and removing
screws and for tightening and releasing nuts and bolts in wood, metal, masonry and concrete.
▶ For this product use only Hilti Liion batteries of the B14 (SID/SIW 14A) or, as applicable, the B18 or
B22 (SID/SIW 22A) series.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Charge status display
The charge status of the Liion battery is displayed after pressing one of the release buttons lightly (press
only until slight resistance is felt).
Status Meaning
4 LEDs light. • Charge status: 75 % to 100 %
3 LEDs light. • Charge status: 50 % to 75 %
2 LEDs light. • Charge status: 25 % to 50 %
1 LED lights. • Charge status: 10 % to 25 %
1 LED blinks. • Charge status: < 10 %
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
3.4 Items supplied
Impact screwdriver/wrench, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by us for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
4 Technical data
4.1 Impact screwdriver/wrench
SID 14A SIW 14A
Rated voltage
14.4 V 14.4 V
Weight (including battery and chuck)
2.9 lb
(1.3 kg)
2.9 lb
(1.3 kg)
Rated speed under no
load
Setting I
0 Hz …16.7 Hz
(0 /min …1,000 /min)
0 Hz …16.7 Hz
(0 /min …1,000 /min)
Setting II
0 Hz …25.0 Hz
(0 /min …1,500 /min)
0 Hz …25.0 Hz
(0 /min …1,500 /min)
Setting III
0 Hz …41.7 Hz
(0 /min …2,500 /min)
0 Hz …38.3 Hz
(0 /min …2,300 /min)
Impact speed
≤ 3,100 bpm ≤ 3,400 bpm
Torque adjustment
3 settings 3 settings
Large standard bolts
M8 to M16 M8 to M16
Printed: 27.07.2016 | Doc-Nr: PUB / 5293001 / 000 / 00