Manualshelf

Use and Care Manual

ManualsBrandsHilti ManualsPower Tool Combo Kits22-Volt Lithium-Ion Keyless Chuck Cordless Hammer Drill Driver/Reciprocating Saw/1/2 in. Impact Wrench Kit (3-Tool)
12345678910
***** For internal use only ***** 27.07.2016 / 10:05:37 - H2\DOK-Projekt\System\WSR_22-A-G1\ENU\WSR18-A_P3
11
1. Engage the transport lock.
2. Check that the connection end of the accessory tool is clean and lightly greased. Clean it and grease it if
necessary.
3. Turn the chuck locking sleeve counterclockwise and hold it in this position.
4. Push the saw blade into the chuck from the front end of the tool.
5. Release the locking sleeve and allow it to click back and engage in its original position.
6. Grip and pull the saw blade to check that it is locked in position.
5.4 Removing the saw blade
1. Engage the transport lock.
2. Turn the chuck locking sleeve counterclockwise and hold it in this position.
3. Pull the blade forward out of the chuck.
4. Release the locking sleeve and allow it to move back to its original position.
5.5 Inserting the battery
WARNING
Electrical hazard! Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts on the
reciprocating saw are free from foreign objects.
WARNING
Risk of injury! Hazard presented by a falling battery.
▶ A falling battery may present a risk of injury to yourself and others. Check that the battery is
securely seated in the reciprocating saw.
Printed: 27.07.2016 | Doc-Nr: PUB / 5293015 / 000 / 00