Manualshelf

Use and Care Manual

ManualsBrandsHilti ManualsPower Tool Combo Kits22-Volt Lithium-Ion Keyless Chuck Cordless Hammer Drill Driver/Reciprocating Saw/1/2 in. Impact Wrench Kit (3-Tool)
78910111213141516
***** For internal use only ***** 27.07.2016 / 10:05:37 - H2\DOK-Projekt\System\WSR_22-A-G1\ENU\WSR18-A_P3
12
▶ Push the battery into the product from the rear as far as it will go and until it is heard to engage with a
double click.
5.6 Switching on
1. Disengage the transport lock.
2. Press the control switch.
5.7 Switching off
WARNING
Risk of injury! Caused by the saw continuing to run.
▶ Do not lift the product away from the workpiece until it has stopped completely.
▶ Wait until the product stops completely before you lay it down.
1. Release the control switch.
2. Engage the transport lock.
5.8 Plunge cutting
WARNING
Risk of injury! Risk of kickback.
▶ Apply the appropriate safety measures at the rear of the workpiece when plunge sawing. Use only
suitable saw blades (length as short as possible).
Note
Use the plunge cutting technique only on soft materials and with short saw blades. The product can
be used in one of two plunge cutting positions: in the normal position or in the reversed position.
Printed: 27.07.2016 | Doc-Nr: PUB / 5293015 / 000 / 00