Manualshelf

Use and Care Manual

ManualsBrandsHilti ManualsPower Tool Combo Kits22-Volt Lithium-Ion Keyless Chuck Cordless Hammer Drill Driver/Reciprocating Saw/1/2 in. Impact Wrench Kit (3-Tool)
78910111213141516
***** For internal use only ***** 27.07.2016 / 10:05:37 - H2\DOK-Projekt\System\WSR_22-A-G1\ENU\WSR18-A_P3
13
1. Bring the forward edge of the AVR contact shoe into contact with the workpiece.
2. Disengage the transport lock.
3. Press the control switch.
4. Press the forward edge of the contact shoe against the workpiece and begin the plunge action by slowly
increasing the angle of attack.
Note
To prevent stalling, it is important that the product is running before the saw blade is brought into
contact with the surface.
5. Once the saw blade has penetrated right through the material, bring the product into the normal working
position (AVR contact shoe flush with the workpiece) and then continue sawing along the cutting line.
5.9 Changing the AVR contact shoe
Note
The AVR contact shoe can be changed when required.
Printed: 27.07.2016 | Doc-Nr: PUB / 5293015 / 000 / 00