Use and Care Manual

***** For internal use only ***** 27.07.2016 / 10:05:37 - H2\DOK-Projekt\System\WSR_22-A-G1\ENU\WSR18-A_P3

1. Engage the transport lock.

2. Remove the saw blade.

3. Pull the rectangular plastic pin forward.

Note

It is located between the two AVR contact shoe guide pins.

4. Pull the AVR contact shoe out.

5. Press the rectangular plastic pin back into the original position.

6. Grease the AVR contact shoe lightly and insert it fully in the guides.

7. Check that the contact shoe has engaged.

6 Care, maintenance, transport and storage

6.1 Care and maintenance of cordless tools

WARNING

Danger of electric shock! Carrying out care and maintenance while the battery is fitted presents a

risk of serious physical injury and burning injury.

▶ Always remove the battery before carrying out all care and maintenance tasks.

Care and maintenance of the tool

• Carefully remove any dirt that may be adhering to parts.

• Clean the air vents carefully with a dry brush.

• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as

these may attack the plastic parts.

Care of the lithiumion batteries

• Keep the battery free from oil and grease.

• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as

these may attack the plastic parts.

• Avoid ingress of moisture.

Maintenance

• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all

function correctly.

• Do not operate the cordless tool if signs of damage are found or if parts malfunction. Have the tool

repaired by Hilti Service immediately.

• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.

Note

To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare

parts, consumables and accessories approved by Hilti for use with the product can be found at your

local Hilti Center or online at: www.hilti.com

Printed: 27.07.2016 | Doc-Nr: PUB / 5293015 / 000 / 00