Use and Care Manual
***** For internal use only ***** 27.07.2016 / 10:05:37 - H2\DOK-Projekt\System\WSR_22-A-G1\ENU\WSR18-A_P3
9
WSR 22A
Stroke rate
0 /min …3,000 /min
Stroke
1.1 in
(28 mm)
Keyless chuck for standard accessory tools
1/2 in
5 Operation
5.1 Safe operation
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Remove the battery before making any adjustments to the power tool or before changing
accessories.
WARNING
Risk of injury! Risk of kickback.
▶ Always use saw blades of adequate length. The end of the saw blade must always project beyond
the workpiece over the entire blade stroke.
WARNING
Risk of injury! Caused by the chuck / accessory tool retaining mechanism
▶ Always hold the power tool securely with both hands on the grips provided. Never use the power
tool without a fully functional hand guard.
Note
The power tool must be pressed against the workpiece until the AVR contact shoe makes firm
contact. This helps ensure maximum safety and good performance.
Printed: 27.07.2016 | Doc-Nr: PUB / 5293015 / 000 / 00