PSA 200 Printed: 15.02.
Printed: 15.02.
PSA 200 Original operating instructions Printed: 15.02.
Printed: 15.02.
1 Information about the documentation 1.1 • • • About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. Observe the safety instructions and warnings in this documentation and on the product. Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons. 1.2 Explanation of symbols used 1.2.
Protection class II (double-insulated) For indoor use only 1.4 Product information products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products. This personnel must be specifically informed about the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
3 Description 3.1 Product @ ; = % & ( ) 3.2 On/off button Windows button Confirmation button Increase brightness Reduce brightness Mute the device Screenshot function + § / : ∙ $ Switch WLAN on/off Touchscreen Battery charge state Power LED Microphone Light sensor Use The tablet is designed to be used to display and analyses scans made with Hilti Scan systems. Scans can be managed in projects and subsequently transferred to a PC for data evaluation and archival. 4 4.1 1. 2. 3. 4. 5. 6. 4.
2. Confirm your entries by pressing the Activate function button. The PSA 200 application cannot be used unless your contact data and a valid activation key have been entered. 4.3 Settings 1. Select the desired language, the desired country and the units you wish to be displayed. When operating a brand new device you will first be requested to select the country-specific settings. 2. Confirm the settings you have made by pressing the OK function button.
4. Confirm your selection by pressing the OK function button and, if individual scans have been selected (see point 4), then select the target project on the PSA 200 tablet. ➥ The selected objects (projects or individual scans) will then be imported. 5. When finished, sever the connection between the PSA 200 and the PS 300 / PS 300W. 5.7 Analyzing scans 1. Select the desired scan from a project. ➥ The scan is then displayed. 2. Use the function button to set the display mode to 2D or 3D. 3. The Param.
Remove the battery. Never transport batteries in bulk form (loose, unprotected). Check the tool and batteries for damage before use after long periods of transport. ▶ ▶ ▶ Storage CAUTION Accidental damage caused by defective or leaking batteries ! ▶ Always store your products with the batteries removed! Store the tool and batteries in a place that is as cool and dry as possible. Never store batteries in direct sunlight, on heating units or behind a window pane.
Printed: 15.02.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 15.02.
