OSHA 1926.1153, Section XII

AG Grinding Submittal
3
Tool models Accessory Vacuums (can use any) Method of compliance
AG 450-7S
AG 450-7D
Dust guard grinding hoods
(Item number 2102983)
VC 125-6
VC 125-9
VC 20-U
VC 40-U
VC 40-UE
VC 150-6 X
VC 150-10 X
VC 150-6 XE
VC 150-10 XE
VC 300-17 X
Table 1 compliant
DEG 500
DCG 500-S
DAG 500-D
AG 500-11S
AG 500-12D
Dust guard grinding hoods
(Item number 267719
or
Item number 2126539)
AG 600-A 36
grinding hoods for AG 600 are
designed for 5 inch max. diameter
wheels only
Dust guard grinding hoods
(Item number 267719
or
Item number 2126539)
VC 150-6 X
VC 150-10 X
VC 150-6 XE
VC 150-10 XE
VC 300-17 X
VC 125-6
VC 125-9
Table 1 compliant
DG 150
Vacuum adapter
(Item number 281862)
VC 300-17 X Table 1
VC 150-6 X
VC 150-10 X
VC 150-6 XE
VC 150-10 XE
Table 1 / Objective data*
VC 125-6
VC 125-9
Exposure assessment
VC 20-U
VC 40-U
VC 40-UE
Objective data*
*See Hilti’s published Objective Data — if not applicable to a specific application, exposure assessment is required.
Check below to see how your system can be compliant with 1926.1153 Table 1. To verify the generation of your tool, check the
rating plate, or call Hilti at 800-879-8000 with your serial number.