Instructions / Assembly

10 English
5.8.5 Aligning door and window frames
5.9 Checking
5.9.1 Checking the plumb point
1. Make a mark on the floor (a cross) in a high room (e.g. in a stairwell or hallway with a height of 5–10 m).
2. Place the tool on an even, level surface.
3. Switch the tool on and unlock the pendulum.
4. Position the tool so that the lower plumb beam coincides with the center of the cross marked on the
floor.
5. Mark the top point of intersection of the laser lines on the ceiling. Attach a sheet of paper to the ceiling
before making the mark.
Printed: 07.09.2017 | Doc-Nr: PUB / 5343678 / 000 / 02