Use and Care Manual

12 English
3.9 Service indicator
The product is equipped with a service indicator LED.
3.9.1 Service indicator status
Status Meaning
The service indicator lights. • End of service interval – servicing
is due.
The service indicator blinks. • Have the combihammer repaired
by Hilti Service.
3.10 Items supplied
Combihammer, side handle, operating instructions.
4 Technical data
When powered by a generator or transformer, the generator or transformer’s
power output must be at least twice the rated input power shown on the rating
plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 120 V. The data may vary
in the event of deviations from the rated voltage and for country-specific
versions. Please refer to the power tool’s type identification plate for details
of its voltage, frequency, current and input power ratings.
TE 60AVR TE 60-ATC/AVR
Rated current input
13 A 13 A
AC frequency
60 Hz 60 Hz
Weight
15.0 lb
(6.8 kg)
17.2 lb
(7.8 kg)
Single impact energy in ac-
cordance with EPTA proce-
dure 05
7.8 J 7.8 J
Ø Hammer drill bits
1/2 in …1 9/16 in
(13 mm …39.7 mm)
1/2 in …1 9/16 in
(13 mm …39.7 mm)
Ø Breach bits
1 9/16 in …3 1/8 in
(39.7 mm …79.4 mm)
1 9/16 in …3 1/8 in
(39.7 mm …79.4 mm)
Ø Percussion core bits
1 3/4 in …4 in
(44.4 mm …100 mm)
1 3/4 in …4 in
(44.4 mm …100 mm)
Ø PCM diamond core bits
•/• 1 1/2 in …4 in
(38 mm …100 mm)
Ø Drill bits for metal
0 in …1/2 in
(0 mm …13 mm)
0 in …1/2 in
(0 mm …13 mm)
Printed: 28.06.2017 | Doc-Nr: PUB / 5277966 / 000 / 01