Manualshelf

Use and Care Manual

ManualsBrandsHilti ManualsDrills120-Volt 13 Amp Corded 1-9/16 in. SDS-Max TE 60-AVR Rotary Hammer, Dust Removal System Kit, Cord and TE-YX Drill Bit
11121314151617181920
14 English
5.1.2 Fitting the depth gauge (optional)
1. Release the side handle clamping band by turning the handle grip.
2. Slide the depth gauge from the front into the 2 guide holes provided.
3. Tighten the side handle clamping band by turning the handle grip.
5.1.3 Setting the power level (optional)
TE 60-ATC/AVR
Note
After the supply cord is connected to the AC supply, the product is
always set by default to full power.
1. Press the power reduction button. The product runs at reduced power
(50 %).
◁ The reduced-power LED lights.
2. Press the power reduction button again. The product runs at full power.
◁ The reduced-power LED goes out.
Printed: 28.06.2017 | Doc-Nr: PUB / 5277966 / 000 / 01