Manualshelf

Use and Care Manual

ManualsBrandsHilti ManualsDrills120-Volt 13 Amp Corded 1-9/16 in. SDS-Max TE 60-AVR Rotary Hammer, Dust Removal System Kit, Cord and TE-YX Drill Bit
11121314151617181920
English 17
5.2.3 Mixing
Note
Use the mixing paddle only with the quick-release chuck.
Use the mixing paddle only when the reduced power (50 %) setting is
active.
1. Insert the quick-release chuck in the power tool’s chuck.
2. Fit the mixing paddle into the quick-release chuck.
3. Set the function selector switch to this symbol: .
4. Press the power reduction (50 %) button.
◁ The product is ready for use.
5.3 Chisel positioning
CAUTION
Risk of injury! Loss of control over the chisel direction.
▶ Do not operate the tool when the selector switch is set to “Chisel
positioning”. Turn the function selector switch until it engages in the
“Chiseling” position.
Note
The chisel can be adjusted to 24 different positions (in 15° increments).
This ensures that flat chisels and shaped chisels can always be set to
the optimum working position.
1. Set the function selector switch to this symbol: .
2. Rotate the chisel to the desired position.
3. Set the function selector switch to this symbol: until it engages.
◁ The product is ready for use.
Printed: 28.06.2017 | Doc-Nr: PUB / 5277966 / 000 / 01