Operating Instruction SC 60W-A36 (01)

16 English 2172267
*2172267*
9.1 The circular saw is in working order.
Trouble or fault Possible cause Action to be taken
The power tool vi-
brates more than
usual.
The saw blade is fitted
incorrectly.
▶ Remove the saw blade
and refit it correctly.
Running speed sud-
denly drops consid-
erably.
The battery is
discharged.
▶ Change the battery
and charge the empty
battery.
Saw advance pressure
is too high.
▶ Reduce advance
pressure and switch
the power tool back
on.
Saw blade is too badly
worn.
▶ Insert a new saw
blade.
9.2 The circular saw is not in working order.
Malfunction Possible cause Action to be taken
No response from
the LEDs on the bat-
tery.
The battery is not cor-
rectly inserted.
▶ Push the battery in
until it engages with a
click.
The battery is
discharged.
▶ Change the battery
and charge the empty
battery.
The battery is too hot or
too cold.
▶ Bring the battery to
the recommended
working temperature.
1 LED on the battery
flashes.
The battery is
discharged.
▶ Change the battery
and charge the empty
battery.
The battery is too hot or
too cold.
▶ Bring the battery to
the recommended
working temperature.
4 LEDs flash. The circular saw was
overloaded briefly.
▶ Release the control
switch and then press
it again.
The overheating preven-
tion cut-out has been
activated.
▶ Allow the circular saw
to cool down and
clean the air vents.
Printed: 04.06.2018 | Doc-Nr: PUB / 5389747 / 000 / 01