OSHA 1926.1153, Section VI and VII
4
SYSTEM OVERVIEW
Core drills from Hilti comply either through use of a water delivery system or a shrouded core bit
hooked up to a Hilti vacuum. Hilti currently offers the below systems with this configuration:
Note: previous generations of tools may have different item numbers or nomenclature. Check with your local Hilti representative or product instruction manual to verify. Table 1 does not
address handheld core drills being used wet. For this reason, the only way to comply with handheld wet core drilling is to utilize objective data or exposure assessment procedures.
Tool Accessory
DD EC-1 (rig mounted)
DD 120
DD 150-U (rig mounted)
DD 160
DD 200
DD 250
DD 350
DD 500
DWP 10 handheld water pump
Any gardena connector with a
supplied water attached to Hilti tool