VC 150-6 X VC 150-6 XE VC 150-10 X VC 150-10 XE Printed: 22.02.
Printed: 22.02.
1 Information about the documentation 1.1 About this documentation • • • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. Observe the safety instructions and warnings in this documentation and on the product. Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons. 1.2 Explanation of symbols used 1.2.
Product information Wet / dry vacuum cleaner Generation Serial no. VC 150-6 XE 01 Product information Wet / dry vacuum cleaner Generation Serial no. VC 150-6 | VC 150-10 02 Product information Wet / dry vacuum cleaner Generation Serial no. VC 150-10 XE 03 1.5 Declaration of conformity We declare, on our sole responsibility, that the product described here complies with the applicable directives and standards.
▶ ▶ Engage the wheel brakes so that the vacuum cleaner stands securely. If the wheel brakes are disengaged the vacuum cleaner may run away out of control. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of a vacuum cleaner can reduce dust-related hazards. 2.4 Use and care of the appliance ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ Never leave the appliance unattended.
2.6 Workplace ▶ ▶ ▶ ▶ ▶ Ensure that the workplace is well lit. Ensure that the workplace is well ventilated. Exposure to dust at a poorly ventilated workplace may result in damage to the health. Keep the workplace tidy. Objects which could cause injury should be removed from the working area. Untidiness at the workplace can lead to accidents. Do not operate the appliance in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
3 Description 3.1 Product overview English Printed: 22.02.
@ ; = % & ( Power outlet on the appliance (only XE) Automatic filter cleaning (only XE) “Filter cleaning ON/OFF” button (only XE) “Automatic filter cleaning” status indicator (only XE) Control switch Hose socket ) + § / : ∙ $ Waste material container Grip recess Catch Vacuum cleaner top section Grip Supply cord hook Catch for filter cover 3.2 Use as directed The products described here are industrial vacuum cleaners designed for universal, commercial use. They can be used for wet or dry applications.
3.
5.1 Operating the appliance for the first time 1. Open the two catches. 2. Lift the vacuum cleaner top section away from the waste material container. 3. Remove the accessories and packaging from the waste material container. 4. Fit a suitable dust bag in accordance with the instructions. 5. Fit the vacuum cleaner top section onto the waste material container and close the two catches. 6. Check to ensure that the vacuum cleaner top section is fitted correctly and secured. 7.
3. 4. 5. 6. 7. 8. Lift the vacuum cleaner top section away from the waste material container. Use a cable tie to close the plastic dust bag below the punched holes. Remove the plastic dust bag. Clean the waste material container with a cloth. Fit a new plastic dust bag (see instructions printed on it) in the waste material container. Fit the vacuum cleaner top section onto the waste material container and close the two catches. 6 Operation DANGER Electrical hazards.
6.3 Picking up dry dust Note Before picking up dry dust, especially dust from mineral materials, always check to ensure that the correct dust bag is fitted in the container. The material picked up by the vacuum cleaner can then be disposed of cleanly and easily. CAUTION Risk of injury. Hazardous material that has been picked up may escape if a filter element is not used. ▶ Never use the appliance without a filter element.
7 Care, maintenance, transport and storage 7.1 Care and maintenance WARNING Danger of electric shock! Carrying out care and maintenance while the supply cord is connected to the power outlet presents a risk of serious injuries including burns. ▶ Always unplug the supply cord before carrying out all care and maintenance tasks. Care • Carefully remove stubborn dirt from the tool. • Clean the air vents carefully with a dry brush. • Use only a slightly damp cloth to clean the casing.
7.3 Fitting/changing the filter element 1. 2. 3. 4. 5. 6. 7. 8. Disconnect the supply cord plug from the power outlet. Open the filter cover catches. Open the filter cover. Carefully remove the filter element, gripping it at the areas provided in the holder. Clean the sealing surface with a cloth. Fit the new filter element. Close the filter cover by flipping the cover catch forward. Close the filter cover catch. 7.4 Checking the container level monitoring system 1. 2. 3. 4.
▶ ▶ ▶ ▶ Remove the power conditioner (if applicable) or loose accessory tools from the holder. Empty the appliance before carrying it to another location. Do not tip the appliance or transport it lying on its side after using it to pick up liquids. Use the tapered adapter to connect both ends of the hose together conveniently for transport. 7.7 Storage ▶ Store the vacuum cleaner in a secure, dry place where it is inaccessible to unauthorized users.
9 Disposal Most of the materials from which Hilti products are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information. Drilling slurry Disposal of drilling slurry directly into rivers, lakes or the sewerage system without suitable pretreatment presents environmental problems.
Printed: 22.02.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 22.02.
