Use and Care Manual

10 English
5.2.1 Switching the device on / off
1.
To switch on the device, turn the control switch to this position: MAX.
To operate the device for a longer period at reduced suction power, set the
control switch to this position: ECO.
2.
To switch off the device, set the control switch to this position: OFF.
5.2.2 Blower function
Before using the blower function, check that there is nothing inside the hose.
Do not point the hose toward persons.
1.
To disconnect the suction hose, press and hold down the EJECT button.
2. Disconnect the suction hose from the suction hose intake socket.
3. Connect the hose to the outlet socket.
The vacuum cleaner is ready for use
In order to use the suction function, reconnect the hose to the intake socket.
5.2.3 Cleaning the filter
1. Switch the appliance on.
2. Hold your hand over the end of the hose.
3. Wait until maximum vacuum pressure is reached.
4.
Press the CLEAN button 4-5 times.
5. Switch the appliance off.
5.2.4 After vacuuming
1.
Turn the control switch to this position: OFF.
2. Empty the container and clean the appliance by wiping it with a damp cloth.
3. Snap the hose into the hose holder.
4. Stow the nozzles away.
5. Store the vacuum cleaner in a secure, dry place where it is inaccessible to unauthorized
users.
CAUTION This vacuum cleaner may be stored only indoors.
6 Care and maintenance of cordless tools
WARNING
Risk of injury with battery inserted !
Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
Carefully remove stubborn dirt from the tool.
Clean the air vents carefully with a dry brush.
Use only a slightly damp cloth to clean the casing. Do not use cleaning agents
containing silicone as these may attack the plastic parts.
Care of the Liion batteries
Keep the battery free from oil and grease.
Use only a slightly damp cloth to clean the casing. Do not use cleaning agents
containing silicone as these may attack the plastic parts.
Printed: 30.01.2018 | Doc-Nr: PUB / 5397558 / 000 / 00