Use and Care Manual

English 11
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make
sure that they all function correctly.
• Do not operate the cordless tool if signs of damage are found or if parts malfunction.
Have the tool repaired by Hilti Service immediately.
• After cleaning and maintenance, fit all guards or protective devices and check that
they function correctly.
6.1 Changing the filter
1. Switch the device off.
2. Open the two catches.
3. Lift the suction head off the waste material container.
4. To remove the filter frame, turn the filter latch through 180 °.
5. Remove the filter along with the filter frame.
6. Remove all dust from the seal and from the filter frame holder.
7. Set the filter frame on a new filter.
8. Fit the filter frame into the holder for the filter frame.
9. Lock the filter frame into position with the filter latches.
10.Set the suction head on the waste material container and close the two catches.
7 Transport and storage of cordless tools
Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery.
▶ Transport the tool and batteries individually packaged.
▶ Never transport batteries in bulk form (loose, unprotected).
▶ Check the tool and batteries for damage before use after long periods of transport.
Storage
CAUTION
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
Printed: 30.01.2018 | Doc-Nr: PUB / 5397558 / 000 / 00