TE 7 Bedienungsanleitung Printed: 19.05.
1 Printed: 19.05.
2 3 4 5 6 7 8 Printed: 19.05.
9 Printed: 19.05.
ORIGINAL BEDIENUNGSANLEITUNG TE 7 Bohrhammer Lesen Sie die Bedienungsanleitung vor Inbetriebnahme unbedingt durch. Bewahren Sie diese Bedienungsanleitung immer beim Gerät auf. Geben Sie das Gerät nur mit Bedienungsanleitung an andere Personen weiter.
Gebotszeichen de Augenschutz benutzen Schutzhelm benutzen Gehörschutz benutzen Leichten Atemschutz benutzen Bemessungsleerlaufdrehzahl Umdrehungen pro Minute doppelt isoliert Linkslauf Rechtslauf Durchmesser Ort der Identifizierungsdetails auf dem Gerät Die Typenbezeichnung ist auf dem Typenschild und die Seriennummer auf dem Motorgehäuse seitlich angebracht.
Hammerbohren Rechts‑/ Linkslauf Umschalter (optional) 2.4 Griffe Vibrationsgedämpfter schwenkbarer Seitenhandgriff mit Tiefenanschlag Vibrationsgedämpfter Handgriff de 2.5 Schutzeinrichtung Mechanische Rutschkupplung 2.6 Schmierung Fettdauerschmierung 2.7 Zum Lieferumfang der Standardausrüstung gehören 1 Gerät 1 Seitenhandgriff mit Tiefenanschlag 1 1 1 1 1 Werkzeugaufnahme TE‑C Click Bedienungsanleitung Hilti Koffer Putzlappen Fett 2.
3 Werkzeuge, Zubehör Bezeichnung de Beschreibung Werkzeugaufnahme TE‑C CLICK Hammerbohrer ∅ 4…24 mm Dünnwandige Hammerbohrkrone ∅ 25…68 mm Mehrzweck-Lochsäge ∅ 25…68 mm, sechskant Setzwerkzeuge C Einsteckende Schnellspannaufnahme für Holz und Metallbohrer mit Zylinderschaft oder mit sechskant Zahnkranzbohrfutter mit Zylinderschaft oder mit sechskant Holzbohrer ∅ 5…20 mm Metallbohrer ∅ 5…13 mm Metallbohrer / Stufenbohrer ∅ 5…22 mm Bezeichnung Kurzzeichen Staubmodul TE DRS‑M Beschre
HINWEIS Der in diesen Anweisungen angegebene Schwingungspegel ist entsprechend einem in EN 60745 genormten Messverfahren gemessen worden und kann für den Vergleich von Elektrowerkzeugen miteinander verwendet werden. Er eignet sich auch für eine vorläufige Einschätzung der Schwingungsbelastung. Der angegebene Schwingungspegel repräsentiert die hauptsächlichen Anwendungen des Elektrowerkzeugs.
de trowerkzeug erhöht das Risiko eines elektrischen Schlages. d) Zweckentfremden Sie das Kabel nicht, um das Elektrowerkzeug zu tragen, aufzuhängen oder um den Stecker aus der Steckdose zu ziehen. Halten Sie das Kabel fern von Hitze, Öl, scharfen Kanten oder sich bewegenden Geräteteilen. Beschädigte oder verwickelte Kabel erhöhen das Risiko eines elektrischen Schlages.
b) Benutzen Sie die mit dem Gerät gelieferten Zusatzhandgriffe. Der Verlust der Kontrolle kann zu Verletzungen führen. c) Halten Sie das Gerät an den isolierten Griffflächen, wenn Sie Arbeiten ausführen, bei denen das Einsatzwerkzeug verborgene Stromleitungen oder das eigene Netzkabel treffen kann. Der Kontakt mit einer spannungsführenden Leitung kann auch metallene Geräteteile unter Spannung setzen und zu einem elektrischen Schlag führen. 5.3 Zusätzliche Sicherheitshinweise 5.3.
5.3.4 Arbeitsplatz Sorgen Sie für gute Beleuchtung des Arbeitsbereichs. b) Sorgen Sie für gute Belüftung des Arbeitsplatzes. Schlecht belüftete Arbeitsplätze können Gesundheitsschäden durch Staubbelastung hervorrufen. c) Verletzungsgefahr bei Durchbrechen des Werkzeugs durch den Untergrund. Sichern Sie den Bereich auf der gegenüberliegenden Seite entsprechend ab. Abbruchteile können heraus‑ und / oder herunterfallen und andere Personen verletzen. a) de 5.3.
4. 5. 6. Führen Sie das Werkzeug in die Werkzeugaufnahme ein und drehen Sie es unter leichtem Anpressdruck, bis es in die Führungsnuten einrastet. Drücken Sie das Werkzeug in die Werkzeugaufnahme bis es hörbar einrastet. Überprüfen Sie durch Ziehen am Werkzeug die sichere Verriegelung. 7.1.3 Werkzeug herausnehmen 5 VORSICHT Benutzen Sie Schutzhandschuhe für den Werkzeugwechsel, da das Werkzeug durch den Einsatz heiss wird. 1. 2. 3. Ziehen Sie den Netzstecker aus der Steckdose.
7.2.4 Rechts‑/Linkslauf 9 VORSICHT Der Rechts‑/Linkslaufschalter darf nicht während des Betriebs betätigt werden. de Drehen Sie den Schalthebel auf Stellung "Rechtslauf" oder "Linkslauf". 8 Pflege und Instandhaltung VORSICHT Ziehen Sie den Netzstecker aus der Steckdose. 8.1 Pflege der Werkzeuge Entfernen Sie fest anhaftenden Schmutz und schützen Sie die Oberfläche Ihrer Werkzeuge vor Korrosion durch gelegentliches Abreiben mit einem ölgetränkten Putzlappen. 8.
Fehler Mögliche Ursache Behebung Gerät hat nicht die volle Leistung. Verlängerungskabel mit zu geringem Querschnitt. Bohrer lässt sich nicht aus der Verriegelung lösen. Steuerschalter nicht ganz durchgedrückt. Werkzeugaufnahme nicht vollständig zurückgezogen. Bohrer trägt nicht ab. Gerät ist auf Linkslauf geschaltet. Verlängerungskabel mit ausreichendem Querschnitt verwenden. (siehe Kapitel Beschreibung) Steuerschalter bis zum Anschlag durchdrücken.
Hilti Corporation Printed: 19.05.2014 | Doc-Nr: PUB / 5071111 / 000 / 02 428556 / A4 428556 Hilti = registered trademark of Hilti Corp., Schaan W 3786 | 0514 | 00-Pos. 8 | 1 Printed in China © 2014 Right of technical and programme changes reserved S. E. & O. *428556* LI-9494 Schaan Tel.: +423 / 234 21 11 Fax:+423 / 234 29 65 www.hilti.