User's Manual

5
3 Description
3.1 Overview of the product 1
@ Fastener guide
; Slider for fastener driving depth
adjustment and for releasing the
fastener guide
= Belt hook
% Safety trigger
& Magazine lockbutton
( Support leg
) Magazine
+ Nail pusher
§ Cooling air slots
/ Gas can compartment
: Battery release button
∙ Battery charge status display
$ Gas can status indicator button
£ Gas can status indicator
3.2 Intended use
The product described is a gas-actuated fastening tool. It is designed to drive suitable
fasteners (nails) into concrete, steel, concrete-block masonry, sand-lime block, rendered
masonry and other materials suitable for use of the direct fastening technique.
Further details can be found in the Fastening Technology Manual, copies of which can
be obtained from a Hilti Service Center or online at: www.hilti.com
The fastening tool is designed for professional use in drywall construction, general
construction work and in various installation trades.
The fastening tool, gas can, battery and fasteners form a technical unit. This means
that trouble-free fastening with this fastening tool can be ensured only when it is used
together with the fasteners, gas cans and batteries specially manufactured for it by Hilti.
The fastening and application recommendations made by Hilti apply only when this
condition is observed.
The fastening tool is for hand-held use only.
▶ Use only Hilti Li-ion batteries from the B 12 series with this product.
▶ Use only Hilti battery chargers of the C 4/12-50 series for charging these batteries.
3.3 Items supplied
Gas-actuated fastening tool with fastener guide, 2 batteries, charger, toolbox and
operating instructions.
You can find other system products approved for your product at your local Hilti Center
or online at: www.hilti.com
3.4 Fastener guide
The fastener guide holds the studs or, respectively, guides the nails and, when the tool is
actuated, thus directs the fasteners into the supporting material at the desired position.
3.5 Guidelines for use on concrete and steel
Information about national regulations, and the Fastening Technology Manual contain-
ing further information, are available from the Hilti marketing organization responsible for
your location.
The Fastening Technology Manual can be found online at: www.hilti.com
3.6 Slider for fastener driving depth adjustment and for releasing the fastener
guide
The slider can be used to reduce the depth to which the fastener is driven. In the «EJECT»
position, it releases the fastener guide for removal.