User's Manual

7
Status Meaning
One LED blinks red. • No gas can or the wrong type of gas
can is present in the fastening tool.
3.11 Indication of battery charge status
After pressing a battery release button, the display shows the status of the battery and
the fastening tool.
Status Meaning
All four LEDs light green. • Charge status is 75 % to 100 %.
Three LEDs light green. • Charge status is 50 % to 75 %.
Two LEDs light green. • Charge status is 25 % to 50 %.
One LED lights green. • Charge status is 10 % to 25 %.
One LED blinks green. • Charge status is below 10 %. The
fastening tool is ready for operation.
One LED blinks green. • The fastening tool is overloaded or
overheated and thus not ready for
operation.
4 Technical data
4.1 Fastening tool
Weight (empty)
8.6 lb
(3.9 kg)
Application temperature, ambient temperature
14 ℉ … 113 ℉
(−10 ℃ … 45 ℃)
Maximum fastener length
1.5 in
(39 mm)
Fastener diameter
• 0.10 in (2.6 mm)
• 0.12 in (3.0 mm)
Compression stroke
1.6 in
(40 mm)
Magazine capacity in strips of 10 nails (Maga-
zine capacity)
1 … 4
Maximum fastener driving frequency (Fasten-
ers per hour)
1,200
5 Loading the fastening tool
5.1 Equipment required for driving nails
Nails are fed through the magazine in strip form (ready-to-use strips of nails).
5.2 Loading the magazine
1. Pull the nail pusher back until it engages.
2. Slide the nail strips into the magazine as far as they will go.